outbackjoe wrote:So with some muscles and slowly crunching away I should be able to get them in?
I haven't got them yet, rrp is $480 I think plus installation. Deciding whether to buy online and do it myself or not.
Steveyb wrote:I got mine for about 430 from ARB from memory.
also, I used a piece of brass tube to slide over the drill bit as a stop point as you can only go through about 6mm on one of the holes above the rear doors because of the airbag canister thingy ma bob being mounted straight under the channel.
*edit*
I used this bugger for the rivets
http://www.tradetools.com/products/ML8061-8
aaronpricey wrote:BUT- I'm takin them back as when I hit 60kms it sound like I'm being followed by a jet engine or about to take off!
I can can feel the drag on the car!
enis.ibrahim wrote:Hi Everyone,
Its been a while since this way posted,but thought i might just ask a quick question.
I have an 06 lux and installed an Arb roof rack the basket type one and i hardly ever use it..
If i was to remove the rack i would have 4 holes in my roof, would any have a suggestion for me?
I was thinking of installing these rhino tracks to make the roof flat and to cover the holes up.
Thanks
Dennis
Users browsing this forum: No registered users and 13 guests