Krat wrote:Hi all, I don't have a photo of my new bar yet because I haven't started to fit it . Hence, my post here.
I have done a huge amount of searching on here and Google without luck and now seek your advice.( Hope this section is the right spot to ask).
I have just purchased a Toyota Bullbar for my 2007 SR D4d 4x4 DC and need a simple step by step process to install it.
The vehicle is currently fitted with a nudge bar which will not help much with the skippies up this way.
I'm sure others have done this and it's probably easy, but a few pointers would be great.
Thanks in anticipation.
Maybe I can do some photos and a write up as I go to help others in the future.
Kev.
Krat wrote:Sorry yet again. Have had SFA luck with getting fitting instructions for the Toyota Breaker bar.
Dropped in to the local Toyota dealer and still no luck, seems like they just chuck them out when installing a new kit.
Any other suggestions or advice would be great.
If all else fails, I suppose I just start taking gear off the lux and see what happens. Don't want to take heaps of time removing stuff if I can avoid it though.
Maybe just a few starting hints would be great.
Thanks,
Kev.
Krat wrote:Sorry yet again. Have had SFA luck with getting fitting instructions for the Toyota Breaker bar.
Dropped in to the local Toyota dealer and still no luck, seems like they just chuck them out when installing a new kit.
Any other suggestions or advice would be great.
If all else fails, I suppose I just start taking gear off the lux and see what happens. Don't want to take heaps of time removing stuff if I can avoid it though.
Maybe just a few starting hints would be great.
Thanks,
Kev.
.fullhouse wrote:
My brother in law works for Toyota parts.... Said they will print on off at customers request
.fracturedranga wrote:
hey mate ill get my lux back from the diff shop tomorrow and can take a heap of pics for you if thatll help. if not ill be pulling mine off in a few weeks when my new bar turns up and can take pics of the disassembly if you can wait
Krat wrote:.fullhouse wrote:
My brother in law works for Toyota parts.... Said they will print on off at customers request
Obviously they are a little more obliging than my local dealer fullhouse. They certainly were not going to give any assistance with this one..fracturedranga wrote:
hey mate ill get my lux back from the diff shop tomorrow and can take a heap of pics for you if thatll help. if not ill be pulling mine off in a few weeks when my new bar turns up and can take pics of the disassembly if you can wait
Any assistance would be great fracturedranga. Thanks for the offer. I am in no big rush to get the bar on. It can sit in the shed for a bit longer
Kev.
Users browsing this forum: No registered users and 4 guests