new 3 inch exhaust throwing engine codes

Turbo, Manifolds, Exhaust, Intercooler, Internals etc

Re: new 3 inch exhaust throwing engine codes

Postby Tys91 on Thu, 20 Dec 2012 10:54 +0000

140k
User avatar
Tys91
 
Posts: 301
Joined: Tue, 27 Dec 2011 9:31 +0000


 

Re: new 3 inch exhaust throwing engine codes

Postby highoctane on Fri, 21 Dec 2012 3:00 +0000

ohh yeah hopefully the 07's arnt the same as the 06's cause it seems to be them that are having the zorst dramas. time will tell tys
highoctane
 
Posts: 170
Joined: Thu, 19 Apr 2012 7:34 +0000

Re: new 3 inch exhaust throwing engine codes

Postby Drew_fraser on Sun, 03 Nov 2013 7:15 +0000

Could it have something to do with.the new exhaust picking the boost up a bit due to a higher flowing exhaust and bringing up an overboost code?
Drew_fraser
 
Posts: 1
Joined: Fri, 03 Aug 2012 12:31 +0000

Re: new 3 inch exhaust throwing engine codes

Postby boxhead55 on Sun, 03 Nov 2013 8:38 +0000

You will be throwing over boost codes.
Clean your map sensor filter it may help
Image

It is located under your black intercooler cover.
Wash it out with carby cleaner or brake cleaner heaps of black shit will come out and the blow bey with compressed air.
User avatar
boxhead55
 
Posts: 2864
Joined: Sat, 15 Jun 2013 3:46 +0000

Re: new 3 inch exhaust throwing engine codes

Postby Marcus123 on Thu, 13 Mar 2014 6:09 +0000

Hey
Ive got similar problems with my 06 lux i have noticed over the lat 18 month the power has dropped off so i fitted a 3" exhaust made a little differance at first so then i had heared of the egr clogging the intakes so i remover all the intake and had it acid dipped and cleaned and blocked the egr off and fitted a torqit chip and it only dyno at 74 kw at the wheels before and 94 kw after the chip now it is throwing limp modes quite regulary when going up hills with about half throttle under boost load the code is P1251 turbo stepp motor just wondering if anyone else has had similar problems and is there any easy checks i can do to find out exactly whats going on before i start throwing parts at it

Cheers Mick
Marcus123
 
Posts: 2
Joined: Thu, 13 Mar 2014 5:42 +0000

Re: new 3 inch exhaust throwing engine codes

Postby BIGFOOTJR on Thu, 13 Mar 2014 9:23 +0000

Marcus123 wrote:Hey
Ive got similar problems with my 06 lux i have noticed over the lat 18 month the power has dropped off so i fitted a 3" exhaust made a little differance at first so then i had heared of the egr clogging the intakes so i remover all the intake and had it acid dipped and cleaned and blocked the egr off and fitted a torqit chip and it only dyno at 74 kw at the wheels before and 94 kw after the chip now it is throwing limp modes quite regulary when going up hills with about half throttle under boost load the code is P1251 turbo stepp motor just wondering if anyone else has had similar problems and is there any easy checks i can do to find out exactly whats going on before i start throwing parts at it

Cheers Mick


Is this with the chip off?
User avatar
BIGFOOTJR
 
Posts: 1890
Joined: Tue, 10 Jan 2012 7:47 +0000
Location: Western Australia

Re: new 3 inch exhaust throwing engine codes

Postby GeeBung on Thu, 13 Mar 2014 3:34 +0000

Marcus123 wrote:Hey
Ive got similar problems with my 06 lux i have noticed over the lat 18 month the power has dropped off so i fitted a 3" exhaust made a little differance at first so then i had heared of the egr clogging the intakes so i remover all the intake and had it acid dipped and cleaned and blocked the egr off and fitted a torqit chip and it only dyno at 74 kw at the wheels before and 94 kw after the chip now it is throwing limp modes quite regulary when going up hills with about half throttle under boost load the code is P1251 turbo stepp motor just wondering if anyone else has had similar problems and is there any easy checks i can do to find out exactly whats going on before i start throwing parts at it

Cheers Mick


I'd start by unblocking the EGR.
GeeBung
 
Posts: 473
Joined: Thu, 06 Feb 2014 3:27 +0000
Location: Katherine NT

Re: new 3 inch exhaust throwing engine codes

Postby Marcus123 on Mon, 17 Mar 2014 4:52 +0000

well its still went into limp mode with the chip off now i have removed the egr blanking plate and will have to see if limps this week.
Still doesnt explain why it is so under powered and that is has been getting worse
Marcus123
 
Posts: 2
Joined: Thu, 13 Mar 2014 5:42 +0000

Re: new 3 inch exhaust throwing engine codes

Postby fnlstg on Thu, 07 May 2015 11:18 +0000

Same here, ss x-force 3" full system , after one week throws 1251 fault code, stepper motor.
was told the lack of back pressure , the turbo vanes don't know what to do and you get boost spikes, thus throws up the code, but then again my lux is an 06 as well. mate with a 05 has no problems. don't know if I should take the exhaust off or leave it on.
fnlstg
 
Posts: 1
Joined: Sun, 24 Feb 2013 6:47 +0000

Re: new 3 inch exhaust throwing engine codes

Postby Matt1320 on Mon, 08 Jun 2015 6:44 +0000

ruste13 wrote:while i was sitting on the side of the road waiting for the computer to reset the note was quiet, the feul economy was great and the performance felt sluggish :lol:

Seriously though, the car felt to accelerate a bit quicker and it seem to rev a bit lower on the open road which i suppose would improve the economy, note was definatly deeper, no exhaust whistle.

I honestly care about any of that if it keeps throwing codes though!!!! :evil:

Cheers russ


Hi ruste13 ,

Im wondering how the exhaust change has altered the revs on the open road ? :lol:
Matt1320
 
Posts: 1
Joined: Mon, 08 Jun 2015 11:19 +0000
Location: Doreen

Re: new 3 inch exhaust throwing engine codes

Postby dsparsons14 on Wed, 27 Jan 2016 3:25 +0000

hi guys
i have recently bought an 06 hilux with a 3 inch exhaust with a cat and muffler. it also has the stepper motor trouble code and goes in to limp home mode. I'm just wondering if anyone has tried to clean the map sensor and filter and if it helps

cheers dsparsons14
dsparsons14
 
Posts: 2
Joined: Wed, 27 Jan 2016 2:53 +0000
Location: minlaton sa

Re: new 3 inch exhaust throwing engine codes

Postby packeteer on Fri, 29 Jan 2016 11:07 +0000

dsparsons14 wrote:hi guys
i have recently bought an 06 hilux with a 3 inch exhaust with a cat and muffler. it also has the stepper motor trouble code and goes in to limp home mode. I'm just wondering if anyone has tried to clean the map sensor and filter and if it helps

cheers dsparsons14


cleaning maf and map filter is a good place to start...
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: new 3 inch exhaust throwing engine codes

Postby Talktheroo on Fri, 29 Jan 2016 7:21 +0000

P0048 fault code?
It will probably be a new turbo or re-conditioned one if this is the case.
Check your motor rod stroke off the DC motor.
When the ignition is turned on it should pull up.
The Roo.
Passing through country and seeing country are two different things.
User avatar
Talktheroo
 
Posts: 1204
Joined: Sun, 24 Feb 2013 12:45 +0000
Location: Brisbane.

Re: new 3 inch exhaust throwing engine codes

Postby dsparsons14 on Fri, 29 Jan 2016 10:10 +0000

It is the stepper motor fault code for the turbo. I'm reckon it is due to not having enough back pressure in the exhaust system and i was wondering if anyone has found a way around it
dsparsons14
 
Posts: 2
Joined: Wed, 27 Jan 2016 2:53 +0000
Location: minlaton sa

Re: new 3 inch exhaust throwing engine codes

Postby sharp018 on Tue, 15 Nov 2016 4:10 +0000

Many folk here with 2006 hiluxes such as my self

I also run a 3 inch extreme duty Redback exhaust I have both dump pipe with cat and without cat. I fitted without cat firstly and the P2151 stepper code kept coming up so I put the cat pipe on. Has been working alright but still get the code at off occasion

No chips, no block offs

Sprint booster and 33s

My exhaust rubbers got worn and I have extended shackles on my springs which rub on my exhaust so I've cut the exhaust back enough to clear the shackles but by doing then resulted in 1 less support hanger so my rubber clapped out so now my exhaust runs just before the diff

And must admit even though car is a bit sluggish, it hasn't thrown a code

In saying this I've brought a factory exhaust and going to fit it this sunday and see if there is a difference.
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: new 3 inch exhaust throwing engine codes

Postby SRDLUX on Mon, 28 Nov 2016 11:10 +0000

I have had my XForce exhaust on for 60,000 or so. It is a 3' mild steel with a 200c cat and muffler. fitted to a 2012 Hilux. No dramas at all in this whole time, fitted with easy and nice note. no drones
SRDLUX
 
Posts: 2
Joined: Thu, 25 Aug 2016 2:18 +0000
Location: Australia

Previous

Return to Engines

Who is online

Users browsing this forum: No registered users and 6 guests