Dash engine lights

Turbo, Manifolds, Exhaust, Intercooler, Internals etc

Dash engine lights

Postby Scratchblades on Wed, 07 Nov 2018 5:41 +0000

Hi Guys

As you see below , these light have come on a few times now , my trucks serviced every 10k but this happens and I end up in limp mode

Any thoughts ?


Image





Sent from my iPhone using Tapatalk
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000


 

Re: Dash engine lights

Postby Scratchblades on Wed, 07 Nov 2018 5:56 +0000

Guys the its the engine light and ASC lights that come on, 3 lights all up.
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000

Re: Dash engine lights

Postby Gipsy on Wed, 07 Nov 2018 6:00 +0000

You need to check for codes using a scangauge, the lights only indicate there is a problem, codes tell you what the problem is.
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2135
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Dash engine lights

Postby Scratchblades on Wed, 07 Nov 2018 6:33 +0000

Thanks goes the mechanics scan tool say MAP sensor not Maf


Sent from my iPhone using Tapatalk
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000

Re: Dash engine lights

Postby Gipsy on Wed, 07 Nov 2018 7:34 +0000

That doesn't explain the ASC lights
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2135
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Dash engine lights

Postby Scratchblades on Wed, 07 Nov 2018 7:54 +0000

Gipsy wrote:That doesn't explain the ASC lights


i agree with you, anyway the Scann tool came up with the MAP codes twice after testing, so tomorrow itll go in for a Full service and diagnostics
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000

Re: Dash engine lights

Postby Scratchblades on Thu, 08 Nov 2018 5:18 +0000

After a day being serviced and codes tested all the rest of it the fault isn’t the MAP Sensor although we changed that first and rescanned and same codes , disconnect the Steinbauer and reset codes and no codes

The fault is and was the Steinbauer power module, luckily I keep all warranties for everything and called steinbauer and it’s been removed and express posted up as I did purchase the extended warranty.

Zero fault and scan gauge worked a treat, the Steinbauer according to my mechanic more than likely hasn’t been working for over a year

To be honest I never noticed a loss of grunt but anyway. So far so good.




Sent from my iPhone using Tapatalk
Scratchblades
 
Posts: 269
Joined: Wed, 15 May 2013 12:39 +0000


Return to Engines

Who is online

Users browsing this forum: No registered users and 11 guests