NewHilux.net

autoprofessionals.org is the best source of info on techstream. Just read the forum rules, play the game and Autokent is extremely helpful.

version 11 is available now but 10.30.029 is the last version that will run in a VM so I had to downgrade.

xychix: sounds like a driver issue. try reinstalling the drivers for your cable

Ok. I've purchased Tech stream version 10.10.018 and when I try to connect it asks for a "New Key"
Any ideas anybody??

Have a look at the read me file that came with it, it should tell you how to install the registration patch

Is there a link to the latest version of the 62 bit one.

this is the version i just used. installed on windows 7 x64 laptop

https://ln.sync.com/dl/8ddb4eaf0#wr8nj9 ... h-uihkntk2

also reading the how to, i get the part of just turning ignition to accessories on but thats it. when can you switch the engine on?

More wanted a link to the ebay for cable.

do not mean to hijack the thread.
latest techstream software goes to V11.00.017

this ebay cable is the same as this one which is only able to customizing
Xhorse MINI VCI for Toyota TIS Techstream V10.30.029 FW2.0.4 Cable Supports VPW Protocol Free Shipping
http://www.obdii365.com/wholesale/mini- ... pping.html

but this new cable running newer techstream sw covers all Toyota protocols, not only for customizing but programming, i.e programming TPMS
VXDIAG VCX NANO for TOYOTA TIS Techstream V11.00.017 Compatible with SAE J2534
http://www.obdii365.com/wholesale/vxdia ... j2534.html

Having trouble seeing live data for the engine ECU , can see info from all the others but not the one I want to check , injector feedback values , fuel pressure and all the good engine stuff.
2016 manual diesel

Did a cable check and got this , worked fine on my 200 series not sure what's going on.

Sent from my Pixel using Tapatalk

I'd proberly get in trouble for this

But ive got a cracked fully unlocked version of the new
TechStrean Ver ( 12.10.019 )

Virus checked using Norton passed no problems
Little bit of computer knowledge will help but really isn't hard to do

If interested let me know, private pm expiry date is 4999d 23h 59 minutes other words 13 and a half years!!

I've splashed out on VXDIAG VCX NANO from uobd2. Maybe got conned by the hype but thought it looked like a better bit of kit.

No luck getting it working so far though, originally tried in a 64bit W10 VM on my mac air. Then dug out an old HP laptop running Vista, no good either. Blew out the Vista with a fresh 64bit W7, now fresh 32bit W7. Think I've ruled out the OS being the issue...(probably PEBCAK)
Trying out many different sequences of opening software and connecting. Twice it has sort of worked by picking up model code and vehicle spec, but all the fields are blank running health check. Seems to get to that point as a fluke though, normally model code and vehicle spec are blank and the 'A communication error with the ECU occurred. Please confirm the Engine ECU is properly installed.' Assume ECU is installed cos it bloody well starts.

Anyway onto customer support, think this will take a while because it's taking them 24hrs to get back to me, then 12hrs for me to respond cos I'm at work all day. Will keep you posted in case there's anything useful to be learned.


Cheers
Crit

Took a bit to get for me to get the cable/adaptor to work on 64bit win. You've got to modify the registry and install a driver in the correct sequence. There are some instructions floating around on here and on the Google's that I followed and to my surprise actually worked.

What's your start up procedure Steveyb? As in, open VX manager, connect USB, open techstream, plug into DLC, turn on ignition.?


Cheers
Crit

I don't have the VX manager business, just a J2534 cable and techstream. All I have to do is plug in cable, ignition on and open techstream (after the initial installation of course)

Does your module come with specific drivers it needs installed? And have you got antivirus software running as it can sometimes block drivers for USB serial interfaces if it's an unknown publisher, this happens to me if I don't suspend AVG and I end up with the same connection error you receive.

You might be on to something. I use AVG as well, haven't tried suspending it.
The instructions say to install VX Manager, then plug the cable into the laptop and the drivers self install. But there's no more instruction than that. AVG doesn't like the latest VX Manager (1.3), thinks it's a Trojan, so I'm running 1.2.
Will try disabling AVG tonight.


Cheers
Crit

Re drivers, it came with a blank disk, so the supplier gave me some download links.


Cheers
Crit

Instructions that apSlain provided a link for are the ones I used and can help explain a bit re the drivers. You can check what driver version you've been given a link for against what's installed for the device in system, hardware devices, find USB port applicable and open driver tab. Yes AVG will see it as a Trojan, so best suspend or uninstall it temporarily and see if that's the problem before diving in to deep

I have downloaded and activated

Teach stream 12.10.019

I got the cable today went to connect it all up

Now I get to vehicle selection I go Hilux then says Engine the only engine comes up from 2005 to 2016 is 2TR-FE

There is no 1KD-FTV option

With the 2017 has 2GD-FTV and 2TR-FE

Anyone got any ideas ? I tried installing an older version but soon as I click on Connect to vechile it won't as it says it says this version is obselee please update to latest version

Which is the one I have 12.10.019