Re: Aftermarket gauges
Posted: Sun, 20 Mar 2016 6:08 +0000Hi all. Would a puller pod that only goes up to the grab handle work? As the airbags above that. You can see the line in the cover where bag rips out
Page 7 of 7
Posted: Sun, 20 Mar 2016 6:08 +0000Re: Aftermarket gauges
Posted: Sun, 26 Jun 2016 6:59 +0000would also love to know this
Re: Aftermarket gauges
Posted: Sun, 23 Apr 2017 11:51 +0000Guys can anyone with egt gauges give me an idea of max temps and normal running? I have a pyro fitted and wondered what temps others were seeing. I have one which can be set at the temp which triggers the chip to go back to oem tune. Currently set to 675c. I would be interested to find what others are seeing at wot with a load on. Mine has a data log but so far never exceeded 675c.
Re: Aftermarket gauges
Posted: Sun, 23 Apr 2017 3:05 +0000I can get over 600c if i hammer it up a big hill with a trailer on. Normally runs under 350c at 100kmh and a couple hungy round town. My probes is in the dump pipe just after the turbo
Re: Aftermarket gauges
Posted: Sun, 23 Apr 2017 3:12 +0000Thanks fracturedranga thought 675 limit was a bit high, might knock it back to 550c for safety. My probe is in the dump right after the turbo. 3" exhaust helps too. Any others?
Re: Aftermarket gauges
Posted: Sun, 30 Apr 2017 8:44 +0000Hi Paul, where did you get the pillar pod? Cheers
Paul123 wrote:
Hope this works, my first attempt at posting photos.
Paul
Re: Aftermarket gauges
Posted: Sun, 30 Apr 2017 2:39 +0000Hi,
I got the pod from Autron who also supplied the gauges.
It was black, just painted it to match the interior.
Paul
I got the pod from Autron who also supplied the gauges.
It was black, just painted it to match the interior.
Paul
Re: Aftermarket gauges
Posted: Mon, 01 May 2017 6:16 +0000Thanks Paul, it would be nice to find one already painted. Might ask fracturedranga. I think Redarc are doing the Autron gauges now.
Re: Aftermarket gauges
Posted: Mon, 01 May 2017 6:17 +0000Hi fracturedranga, where did you get the pillar pod? Cheers
fracturedranga wrote:i got a couple of the redarc gauges installed in my lux today, come up pretty good
the top one is coolant temp, oil temp and auto trans temp, the bottom is egt and boost.
fro the auto trans i just got the standard sensor removed and taped up and the redarc sensor put in its place, drove home and had no dramas with the trans and no fault codes or light so it seems ok.
what is everyone else seeing for trans temps? mine just on the drive home was sitting at 95 degrees and taking off hard from the lights saw it hit 100 briefly. is this normal or am i going to have to get a trans cooler? im running 33's with 4.11 diff gears.
also what have people been setting there warnings at?
Re: Aftermarket gauges
Posted: Thu, 11 May 2017 10:25 +0000I just order myn from 4x4 concepts. Just google them! I think it should be in mail today!!!
My question is where did you guys wire the redarc gauges wires??? More the brown wire for the dimming? Ta
My question is where did you guys wire the redarc gauges wires??? More the brown wire for the dimming? Ta
Re: Aftermarket gauges
Posted: Thu, 11 May 2017 1:37 +00004x4 concepts is where i got mine as well
Re: Aftermarket gauges
Posted: Mon, 06 Nov 2017 11:39 +0000Fab'd up a holder for my redrac Dual Battery Monitor G52-VVA for the waste of space next to the climate control in my 2014 SR5 Hilux.
http://imghostr.net/image/Ds5U
http://imghostr.net/image/DoUY
http://imghostr.net/image/Ds5U
http://imghostr.net/image/DoUY
Re: Aftermarket gauges
Posted: Thu, 26 Apr 2018 3:52 +0000What sort of prices are you paying over in Aus for a G52-BET?
Cheers, Cam
Cheers, Cam
Re: Aftermarket gauges
Posted: Thu, 26 Apr 2018 5:54 +0000Hey Cam they are $375 on eBay at the moment.
If you keep and eye out you can get one for cheaper. I got mine for $230 from an auction on there
Sent from my iPhone using Tapatalk
If you keep and eye out you can get one for cheaper. I got mine for $230 from an auction on there
Sent from my iPhone using Tapatalk
Re: Aftermarket gauges
Posted: Fri, 27 Apr 2018 2:16 +0000Yeah that’s what I found too. But why are they cheaper than what’s advertised on the Red Arc page?
Just wanting to make sure there Arno bogus ones out there.
Just wanting to make sure there Arno bogus ones out there.
Re: Aftermarket gauges
Posted: Fri, 27 Apr 2018 4:52 +0000Just be aware that anyone selling redarc products on ebay is not a redarc dealer and the products will not be covered by redarcs warranty!
Sent from my SM-G955F using Tapatalk
Sent from my SM-G955F using Tapatalk
Re: Aftermarket gauges
Posted: Fri, 27 Apr 2018 6:36 +0000^ ^ ^ ^
I have Redarc gauges that have had warranty issues.
If not purchased through a Redarc dealer NO Warranty.
I have Redarc gauges that have had warranty issues.
If not purchased through a Redarc dealer NO Warranty.
Re: Aftermarket gauges
Posted: Fri, 27 Apr 2018 6:43 +0000Find a reputable seller and ask them before you purchase if they will provide the warranty.
I contacted who I purchased mine though after Luke let me know about the warranty issue and they said they will honour the warranty. I have it in writing now if anything goes wrong.
Just couldn’t justify $460 for one gauge
Sent from my iPhone using Tapatalk
I contacted who I purchased mine though after Luke let me know about the warranty issue and they said they will honour the warranty. I have it in writing now if anything goes wrong.
Just couldn’t justify $460 for one gauge
Sent from my iPhone using Tapatalk
Re: Aftermarket gauges
Posted: Mon, 16 Sep 2019 2:26 +0000Can someone please tell me the location (or picture) of the oil pressure sender and the best way to swap it out for an adaptor to add another pressure sender to the VDO gauge? 2017 KUN26 D4D.
Re: Aftermarket gauges
Posted: Sun, 29 Sep 2019 8:13 +0000T piece from original gauge mate it’s under oil filter area