Engine loses power - P2008 Error Code

Turbo, Manifolds, Exhaust, Intercooler, Internals etc

Engine loses power - P2008 Error Code

Postby Hiluxboy on Sat, 31 Dec 2011 5:52 +0000

Hi everyone, I have a question for all of you out there and wondering if this has happened to anyone else and what the problem could be :?
I have a 2006 T/D auto KUN26R with 83000ks on the clock. Recently it has developed a nasty habit of when overtaking loosing all power, going into limp mode and the malfunction indicator light coming on (the one that looks like an engine). It was due for the 80000k service so booked it in with Toyota in Cairns.
They connected it to their scan tool and came up with an error code of P2008 - 'Intake manifold runner control' from the ECU.
Toyota cleaned the manifold runner control valve and cleaned all connectors as well as the filters on the solenoids.
The fuel filter was quite dirty so was replaced. Thinking that this should of fixed the problem, but it happened again :( Taking it back and still finding the same error code, and after discussions with head office in Melbourne, Toyota replaced one of the solenoids which may have been at fault (it was very badly clogged with dust before cleaning it out).
Since all this has been done, the same problem occurred today in the exact same bit of the highway whilst overtaking a semi-trailer!! :shock:
Has this error code or problem ever happened to anyone before :?: Its getting quite frustrating as I dont know when its going to happen (only seems to do it when travelling at 100kph and go to overtake) and makes me second guess myself for when I want to overtake another vehicle.
Has anyone got any ideas? After all this, maybe I'm thinking it could be an injector faulty??? The engine is standard with no power chip but with an aftermarket 3" exhaust. Can anyone help please? :(
Hiluxboy
 
Posts: 5
Joined: Thu, 21 Aug 2008 4:03 +0000


 

Error code P2008

Postby Hiluxboy on Sun, 01 Jan 2012 9:47 +0000

Hi everyone, I have a question for all of you out there and wondering if this has happened to anyone else and what the problem could be
I have a 2006 T/D auto KUN26R with 83000ks on the clock. Recently it has developed a nasty habit of when overtaking loosing all power, going into limp mode and the malfunction indicator light coming on (the one that looks like an engine). It was due for the 80000k service so booked it in with Toyota in Cairns.
They connected it to their scan tool and came up with an error code of P2008 - 'Intake manifold runner control' from the ECU.
Toyota cleaned the manifold runner control valve and cleaned all connectors as well as the filters on the solenoids.
The fuel filter was quite dirty so was replaced. Thinking that this should of fixed the problem, but it happened again Taking it back and still finding the same error code, and after discussions with head office in Melbourne, Toyota replaced one of the solenoids which may have been at fault (it was very badly clogged with dust before cleaning it out).
Since all this has been done, the same problem occurred today in the exact same bit of the highway whilst overtaking a semi-trailer!!
Has this error code or problem ever happened to anyone before Its getting quite frustrating as I dont know when its going to happen (only seems to do it when travelling at 100kph and go to overtake) and makes me second guess myself for when I want to overtake another vehicle.
Has anyone got any ideas? After all this, maybe I'm thinking it could be an injector faulty??? The engine is standard with no power chip but with an aftermarket 3" exhaust. Can anyone help please?
Hiluxboy
 
Posts: 5
Joined: Thu, 21 Aug 2008 4:03 +0000

Re: Error code P2008

Postby jap on Sun, 01 Jan 2012 4:50 +0000

DTC No. - P2008/58

DTC Detection Condition - When actual intake air volume detected by MAF meter continues to be smaller than volume estimated from boost pressure and intake air temperature sensor, ECM determines that swirl control valve is stuck closed.
(1 trip detection logic)

Trouble Area - VSV for swirl control valve
Open or short in VSV for swirl control valve circuit
Intake manifold (swirl control valve)
EGR valve assembly
MAF meter
ECM
The Quickest TRD Hilux in Australia - 13.690 @ 100.56mph
True Bolt-On Power, Performance & Reliability

Traded for:

BT50 D/C 3.2l Auto - TJM Deluxe Bullbar - TJM Rear Step - TJM Canopy - Airtec Snorkel
User avatar
jap
 
Posts: 1759
Joined: Sat, 26 Jun 2010 8:29 +0000
Location: The F**ked Road State

Re: Error code P2008

Postby Squid_87 on Sat, 14 Jan 2012 8:37 +0000

Hiluxboy,

Mate I'm having the exact same problem with the same mileage on mine. I've got an August 2005 SR Single cab KUN26R. Its coming up 'Intake Manifold Runner Bank 1 Circuit - Open'. She had the 80,000 service then I went for a long distance drive. First happened around the 82,xxx mark. Was overtaking a truck and then bang no power, not above 2500 rpm. Turned the engine off, was good for 200km then happened again (on the same day). Drove another 350km back to home, no worries. Then happened 120km into my next journey driving out to work while overtaking an AB Triple!!. When it happens I'm overtaking in 4th doing about 120-125 km/h

The only engine mods mine has is: Safari snorkel, Repco paper filter, 3 inch mandrel bent exhaust.
Cheers,
Luke

08/05 SR single cab, heavy duty steel tray, steel canopy with vinyl sides and mozzie net, Dobinsons 2in lift, ECB big tube alloy bar, Nitestalker 100w spotlights, 55w under tray reverse spotlights, 31x10.5 Maxxis Bighorns on 15x7 Sunraysias
User avatar
Squid_87
 
Posts: 231
Joined: Tue, 05 Feb 2008 2:00 +0000
Location: Rockhampton, QLD

Re: Error code P2008

Postby Steve9R on Sat, 14 Jan 2012 8:40 +0000

would pay to do a MAF sensor clean if you havent already then..

Steve
User avatar
Steve9R
Valued Contributor
 
Posts: 5248
Joined: Wed, 11 Apr 2007 1:00 +0000
Location: Melbourne, VIC

Re: Engine loses power

Postby TuffluxOffroad on Sat, 14 Jan 2012 8:56 +0000

Gday mate
Ive had this same prob for about 3 years,but different code (P1251) which states stepper motor fault ridiculous but true, its been to 4 places been on 2 dynos and finally looks like being rectified after Turbo, ECM, sensors, etc etc etc were replaced to no avail

Without prejudice i found the manufacturer was not much help as it was out of their ballpark, If i were you i would find someone with specialist diesel diagnostic testing such as Cornells in Vic or similiar in your area,
Hope this helped

Cheers
Guy
TuffluxOffroad
 
Posts: 9
Joined: Mon, 22 Feb 2010 6:26 +0000
Location: Sunbury VIC

Re: Error code P2008

Postby Squid_87 on Sun, 15 Jan 2012 8:48 +0000

I asked Toyota to do that as part of the 80,000 because it was heavy on fuel and I was too lazy to do it myself. Fuel economy has increased dramatically but still this intermittent error. The code is still active and is going back in tomorrow, I think they've stuffed up something during the service; possibly something on the intake bank when removing the intercooler, etc to take the lid off to do the valve lash inspection as part of the 80,000
Cheers,
Luke

08/05 SR single cab, heavy duty steel tray, steel canopy with vinyl sides and mozzie net, Dobinsons 2in lift, ECB big tube alloy bar, Nitestalker 100w spotlights, 55w under tray reverse spotlights, 31x10.5 Maxxis Bighorns on 15x7 Sunraysias
User avatar
Squid_87
 
Posts: 231
Joined: Tue, 05 Feb 2008 2:00 +0000
Location: Rockhampton, QLD

Re: Engine loses power

Postby cambelt on Sun, 15 Jan 2012 11:29 +0000

I have the same trouble with mine , Im doing 100 klm go to overtake , all goes well for 10 seconds then with no warning loses power down to like 10 % . Bloody dangerous, I have a 2.5 in ex with no cat and straight thru muffler . I havent scanned it yet but my guess is overboosing . All filters new , EGR restricted too 12 mm, FMIC . Also noted EGT,s went to 580 odd post turbo
Dave
cambelt
 
Posts: 40
Joined: Thu, 28 Apr 2011 4:55 +0000

Re: Engine loses power

Postby dolphin on Mon, 23 Jan 2012 2:39 +0000

i have the same problem. mine is hilux vigo 3.0 D4D. but when i drive 160 km/h the engine light up warning and lose power... i take to toyota dealer they clean the manifold and change the fuel injector. it cause me a lot already but it still appears... i also looking for forward what to do next........
dolphin
 
Posts: 4
Joined: Wed, 30 Nov 2011 9:59 +0000

Re: Engine loses power

Postby jap on Mon, 23 Jan 2012 2:55 +0000

Let the floor under the throttle see some daylight
The Quickest TRD Hilux in Australia - 13.690 @ 100.56mph
True Bolt-On Power, Performance & Reliability

Traded for:

BT50 D/C 3.2l Auto - TJM Deluxe Bullbar - TJM Rear Step - TJM Canopy - Airtec Snorkel
User avatar
jap
 
Posts: 1759
Joined: Sat, 26 Jun 2010 8:29 +0000
Location: The F**ked Road State

Re: Engine loses power

Postby Your Mum on Mon, 23 Jan 2012 4:09 +0000

Bugger
Your Mum
User avatar
Your Mum
 
Posts: 40
Joined: Tue, 27 Dec 2011 2:57 +0000
Location: Brisbane Qld

Re: Engine loses power

Postby Osborn on Sun, 29 Jan 2012 2:35 +0000

I have the same thing going on real bad with trailer on got to stay under 3000 revs or trips out 10% power 06 hilux auto giving me the shits anyone got to the bottom of this yet p2008
Osborn
 
Posts: 1
Joined: Sun, 29 Jan 2012 11:30 +0000

Re: Engine loses power

Postby danmcccc on Sun, 29 Jan 2012 6:02 +0000

dolphin wrote:i have the same problem. mine is hilux vigo 3.0 D4D. but when i drive 160 km/h the engine light up warning and lose power... i take to toyota dealer they clean the manifold and change the fuel injector. it cause me a lot already but it still appears... i also looking for forward what to do next........

your driving how fast :?
old enough to know better...young enough to not give a f**k

MY KILLER BUILD THREAD
viewtopic.php?t=9235
User avatar
danmcccc
 
Posts: 2522
Joined: Mon, 10 Jan 2011 5:16 +0000
Location: Brisbane, westside

Re: Engine loses power

Postby adamw on Tue, 31 Jan 2012 6:31 +0000

dolphin wrote:i have the same problem. mine is hilux vigo 3.0 D4D. but when i drive 160 km/h the engine light up warning and lose power... i take to toyota dealer they clean the manifold and change the fuel injector. it cause me a lot already but it still appears... i also looking for forward what to do next........


:shock: :shock: :shock: :shock: Hiluxes go that fast??????? :lol:
User avatar
adamw
 
Posts: 81
Joined: Wed, 12 Oct 2011 2:06 +0000
Location: Rockhampton

Re: Engine loses power

Postby jap on Tue, 31 Jan 2012 6:56 +0000

Down a mine shaft
The Quickest TRD Hilux in Australia - 13.690 @ 100.56mph
True Bolt-On Power, Performance & Reliability

Traded for:

BT50 D/C 3.2l Auto - TJM Deluxe Bullbar - TJM Rear Step - TJM Canopy - Airtec Snorkel
User avatar
jap
 
Posts: 1759
Joined: Sat, 26 Jun 2010 8:29 +0000
Location: The F**ked Road State

Engine loses power

Postby paw55h on Tue, 31 Jan 2012 11:18 +0000

dolphin wrote:i have the same problem. mine is hilux vigo 3.0 D4D. but when i drive 160 km/h the engine light up warning and lose power... i take to toyota dealer they clean the manifold and change the fuel injector. it cause me a lot already but it still appears... i also looking for forward what to do next........


You should try second gear
Knowledge is knowing a tomato is a fruit
Wisdom is knowing not to put it in the fruit salad
http://newhilux.net/phpbb/viewtopic.php?f=41&t=8669
User avatar
paw55h
 
Posts: 498
Joined: Mon, 28 Dec 2009 6:02 +0000
Location: cherrybrook NSW

Re: Engine loses power

Postby dolphin on Sun, 05 Feb 2012 9:48 +0000

i have try cleans and lubricate the minfold sensor and the mechanical. so far so good the problem have solve... will update again.....
dolphin
 
Posts: 4
Joined: Wed, 30 Nov 2011 9:59 +0000

Re: Engine loses power

Postby dopelux on Mon, 27 Feb 2012 5:23 +0000

hey lads im new to this forum so firstly hi to all.
I travel to sydney every day in my 2wd 2005 D4D it has 117000km and last thursday and friday in the afternoon coming home i was driving up mooney hill after the bridge i hit about 125km/h and boom engine light and limp mode. happened both days at the same spot and seems to be under heavy accelleration i am going to shepards diesel in gosford today and will post up any findings.
dopelux
 
Posts: 2
Joined: Sun, 26 Feb 2012 3:44 +0000

Re: Engine loses power

Postby blownlux on Mon, 27 Feb 2012 8:49 +0000

good place to start get your manifold cleaned out, will not hirt any way, I have seen this put up odd errors.
blownlux
 
Posts: 214
Joined: Mon, 24 May 2010 8:18 +0000
Location: perth

Re: Engine loses power

Postby dopelux on Sun, 04 Mar 2012 12:28 +0000

ok chaps decided to clean my kn airfilter and afm with crc air flow metre cleaner have since driven to sydney 5 times with no problems cost $25 for the can of cleaner but i think this may have solved the problem
dopelux
 
Posts: 2
Joined: Sun, 26 Feb 2012 3:44 +0000

Next

Return to Engines

Who is online

Users browsing this forum: No registered users and 12 guests