by Lukes Hilux on Sat, 24 Dec 2011 7:08 +0000
FOR THE 1KD-FTV ENGINE
36. INSTALL FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)
Clean the bolt holes.
Apply adhesive to 2 or 3 threads of the new bolt end.
Uniformly install and tighten the 8 bolts in the sequence shown in the illustration.
bottom-top-9o'clock-3o'clock-11o'clock,5o'clock,2o'clock,7o'clock
Torque:
178 N*m{ 1,815 kgf*cm , 132 ft.*lbf }
NOTICE:
Do not start the engine for at least 1 hour after the installation.
The Older I get, The younger I used to feel.