Re: Error code P2008
Posted: Sun, 26 Jan 2014 7:04 +0000Wow love toyotas ha!!! When thy are good they are great when then give you these faults well f____ me they are painful
The Roo.
NewHilux.net
NewHilux.net Forum
https://www.newhilux.net/phpbb/
Engine loses power - P2008 Error Code
Page 5 of 9
Posted: Sun, 26 Jan 2014 7:04 +0000Re: Error code P2008
Posted: Tue, 28 Jan 2014 8:35 +0000No pain, no gain.
The Roo.
The Roo.
Re: Error code P2008
Posted: Wed, 29 Jan 2014 6:06 +0000The gain of have a car that should do what it is meant to do!! Ha hate working on cars, but can't live without them ha
Re: Error code P2008
Posted: Tue, 04 Feb 2014 6:12 +0000Hi
Seems I misread my own fault codes , I have P2006 and not P2008 .
Correct me if I'm wrong but p2006 is intake runners stuck and P 2008 is circuit open
Is there a toyota protocol for P 2006
Dave
Seems I misread my own fault codes , I have P2006 and not P2008 .
Correct me if I'm wrong but p2006 is intake runners stuck and P 2008 is circuit open
Is there a toyota protocol for P 2006
Dave
Re: Error code P2008
Posted: Sun, 09 Feb 2014 6:50 +0000Well my hilux has been sitting with Toyota now for 2 weeks and still no solution. They have tried everything.
Re: Error code P2008
Posted: Sat, 22 Feb 2014 1:06 +0000Had the vehicle back 10 days and after really giving it a flogging, limp mode has stopped. The solution was a combination of things
Inlet manifold removed and was sent away to be pressure cleaned
Removed and replaced with new EGR valve assembly and gaskets
Replaced all vacuum lines to EGR VSV
Removed and replaced with new MAF sensor in air box
Replace air filter (I had an air filter from taipan exhaust)
So far so good. Towed the van and no issues.
Inlet manifold removed and was sent away to be pressure cleaned
Removed and replaced with new EGR valve assembly and gaskets
Replaced all vacuum lines to EGR VSV
Removed and replaced with new MAF sensor in air box
Replace air filter (I had an air filter from taipan exhaust)
So far so good. Towed the van and no issues.
Re: Error code P2008
Posted: Tue, 25 Feb 2014 6:35 +0000Great result bet that was costly
Re: Error code P2008
Posted: Sun, 02 Mar 2014 8:45 +0000what was the cost
Re: Error code P2008
Posted: Tue, 04 Mar 2014 3:05 +0000$1250
Re: Engine loses power - P2008 Error Code
Posted: Tue, 04 Mar 2014 11:21 +0000Ok. I have merged a pile of the same threads on the P2008 error code together.
Please read again from the start of this thread about the issues and resolutions people have had with P2008.
Steve
Please read again from the start of this thread about the issues and resolutions people have had with P2008.
Steve
Re: Engine loses power - P2008 Error Code
Posted: Tue, 01 Jul 2014 9:27 +0000All my post have been short term mine is still doing it!!!!! Bugger me
Re: Engine loses power - P2008 Error Code
Posted: Thu, 03 Jul 2014 7:15 +0000Has anyone got a clear direction as too where or what I should replace to fix this??
Re: Engine loses power - P2008 Error Code
Posted: Thu, 03 Jul 2014 12:10 +0000Did you end up getting the intake cleaned entirely?
Re: Engine loses power - P2008 Error Code
Posted: Fri, 04 Jul 2014 7:08 +0000No I didn't as I sent it too a diesel specialist Gemini diesel and they dyno it and tried to get it too fault and nothing would happen all the test said everything was opening and closing when they should he said unless it gets worse or I can get it to him with the engine light on so they can trace it. But as soon as the key is turned off and back on the light and problem goes!!!! So no I have not had the intake cleaned as yet. Do you think it's a starting point? Or I have te thought it might be the sensor in the air intake? Would like to swap with another that is fine but this problem does not seem to be a straight forward fix
Re: Engine loses power - P2008 Error Code
Posted: Sun, 13 Jul 2014 1:12 +0000Need help!!
Re: Engine loses power - P2008 Error Code
Posted: Sun, 13 Jul 2014 2:15 +0000Have you tried changing the swirl control valve? That was my problem.
Re: Engine loses power - P2008 Error Code
Posted: Sun, 13 Jul 2014 4:43 +0000Was yours putting the 2008 code up? Did you clean your egr or just the swirl control??
Thanks mate
Thanks mate
Re: Engine loses power - P2008 Error Code
Posted: Sun, 13 Jul 2014 5:46 +0000Same code. And just changed scv
Re: Engine loses power - P2008 Error Code
Posted: Sun, 13 Jul 2014 6:51 +0000Sweet man might give that a shot. What was it worth $? From toyota?
Re: Engine loses power - P2008 Error Code
Posted: Mon, 14 Jul 2014 8:45 +0000Toyota won't sell you the SCV by itself. I was told you can't change the SCV, you need a new fuel pump. Try a Denso agent. My SCV was $118 plus gst and freight from a local diesel repair shop bought in from Denso Australia.