Yep, you can't beat the old rattle gun. If you haven't got a rattle gun, just tighten the camshaft bolt as tight as you can without moving the pulley off the timing mark. Install the timing assembly, belt and all.
Then do this.
![Image](http://i1334.photobucket.com/albums/w656/Talktheroo/Water%20Pump%20Images/1050492%20Water%20Pump%20150%20640_zpsexfjo4mn.jpg)
Use a good quality torque wrench and torque to the specification, 98Nms. Note, that is not a good quality torque wrench. It's a cheapie and is used as a breaker bar. Warren and Brown beam wrench will do the job.
The Roo.
Passing through country and seeing country are two different things.