STICKER APPLICATIONok kiddys i have done all the stickers and will be sending tomoz.
sticker no3 application. Firstly get licence card and rub over sticker & abb tape again. Have facing this side up as i wrote for you
then peal back slow taking care that all the sticker peals back properly- If you notice its not sticking to ab tape when pealing pinch abb tape and sticker together and sticker will stick to ab tape. Take your time and you shouldn’t have any dramas.
Now with reflective sticker no 1,
Step 1: lay sticker this way up as directed, & rub Drivers licence over it to make sure abb tape & sticker are together.
Step 2: Peal back abb tape as directeded and apply sticker to attended surface.
Step 3: Once you have apllied your sticker to the attended surface and rubbed with drivers licence for strong bond. you will also note that the (E) in Net has not been weeded out due to difficulty of weeding this sticker But its all sweet because this is the time to do it with a blade, please take your time & there will be no drammas
Below is my truck fitted with sticker no1 at 7pm tonight easy 123
Cheers boys,
Put it in gear and go farking go.