Buying a blown 1kd

General discussion of basically anything Hilux related

Re: Buying a blown 1kd

Postby Rob_Wood on Wed, 09 Dec 2020 1:49 +0000

LHooley wrote:The pickup was spotless when I pulled the motor apart yesterday, The injectors were pretty caked but nothing too bad.

As for the mods..

Theres some modified pistons you can buy through a mob called G&L Performance

They do a modified, forged, coated piston upgrade which fixes the risk for cracking.

Currently the plan is to also

- Stronger pistons
- Balance shaft delete
- Hi-Flow Turbo

And it should fly for 500,000kms


All sounds good, but I'd suggest doing a "History Check" on after-market components that are so integral to what you're doing. The reason I say this involves a little story of my own history:
Rebuilt a VW Kombi years ago and swapped out the original engine for a "Cheaper" Brazillian engine. Fitted it up with Hot-Dogs and Extractors, sounded absolutely awesome. At 18 - 19 years old It used to stand up when I took off from the lights, it was great. Yeah, I should've run it in before dancing it around, but the Brazillian engine only lasted a couple of months. Luckily Dad was there to talk me into replacing it with a 3 speed 78 Patrol instead of a Porsche engine changeover or I might not've been here to pass on the story. ;) ;) ;)
Rob_Wood
 
Posts: 869
Joined: Mon, 21 Sep 2020 8:32 +0000
Location: NSW


 

Re: Buying a blown 1kd

Postby Gipsy on Wed, 09 Dec 2020 2:59 +0000

Gee Rob, I bet you wish you kept the Kombi now, they're worth a mint :D
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2146
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Buying a blown 1kd

Postby HK1837 on Wed, 09 Dec 2020 4:14 +0000

There used to be a Kombi in Newcastle with BBC a P76 4.4L V8 in it. It was still pretty slow though due to weight, but he used to pour milk on the tyres and do burnouts with it at the Kooragang drag strip! My 1974 FJ40 with a 327 from a HK in it used to lift the front wheels off the ground. Used to beat all the local hot 4cyl cars of the day like turbo Lasers etc.
HK1837
 
Posts: 1060
Joined: Tue, 17 May 2011 1:31 +0000

Re: Buying a blown 1kd

Postby hiluxxury on Wed, 09 Dec 2020 5:36 +0000

Whoa - ford laser turbo! Those were the days :D
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: Buying a blown 1kd

Postby HK1837 on Wed, 09 Dec 2020 6:13 +0000

They were pretty quick cars as they were light and AWD, road tests show them as good for a 15.5s quarter. Not many Australian cars on the road in the early 90’s were quicker than that. Took a GT-HO, HK-HG GTS327/350, Charger E38/49/55, pre-pollution SLR5000/SS 5.0L or one of the GroupA Holdens to be faster than that. Or one of the higher output HDT or HSV cars.
HK1837
 
Posts: 1060
Joined: Tue, 17 May 2011 1:31 +0000

Re: Buying a blown 1kd

Postby LHooley on Thu, 10 Dec 2020 5:00 +0000

Rob_Wood wrote:
LHooley wrote:The pickup was spotless when I pulled the motor apart yesterday, The injectors were pretty caked but nothing too bad.

As for the mods..

Theres some modified pistons you can buy through a mob called G&L Performance

They do a modified, forged, coated piston upgrade which fixes the risk for cracking.

Currently the plan is to also

- Stronger pistons
- Balance shaft delete
- Hi-Flow Turbo

And it should fly for 500,000kms


All sounds good, but I'd suggest doing a "History Check" on after-market components that are so integral to what you're doing. The reason I say this involves a little story of my own history:
Rebuilt a VW Kombi years ago and swapped out the original engine for a "Cheaper" Brazillian engine. Fitted it up with Hot-Dogs and Extractors, sounded absolutely awesome. At 18 - 19 years old It used to stand up when I took off from the lights, it was great. Yeah, I should've run it in before dancing it around, but the Brazillian engine only lasted a couple of months. Luckily Dad was there to talk me into replacing it with a 3 speed 78 Patrol instead of a Porsche engine changeover or I might not've been here to pass on the story. ;) ;) ;)


It will be fine, these guys have been going around for quite awhile now. And alot of high performance builders swear by them also. So its a win in my book
LHooley
 
Posts: 19
Joined: Mon, 26 Oct 2020 11:48 +0000
Location: Crib Point, vic

Re: Buying a blown 1kd

Postby davo94 on Thu, 10 Dec 2020 5:54 +0000

I spoke to that mob, they use a factory piston and machine it to suits your application. over 2k in pistons alone, then add rings.
Another 2013 sr5 owner..
davo94
 
Posts: 377
Joined: Sat, 26 Oct 2013 4:48 +0000

Re: Buying a blown 1kd

Postby Gipsy on Thu, 10 Dec 2020 8:34 +0000

Sounds like the 2015+ pistons are the safer bet.
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2146
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Buying a blown 1kd

Postby LHooley on Wed, 27 Jan 2021 8:04 +0000

davo94 wrote:I spoke to that mob, they use a factory piston and machine it to suits your application. over 2k in pistons alone, then add rings.


There goes my wallet then
LHooley
 
Posts: 19
Joined: Mon, 26 Oct 2020 11:48 +0000
Location: Crib Point, vic

Re: Buying a blown 1kd

Postby Skrewdriver on Wed, 27 Jan 2021 8:21 +0000

HK1837 wrote:There used to be a Kombi in Newcastle with BBC a P76 4.4L V8 in it. It was still pretty slow though due to weight, but he used to pour milk on the tyres and do burnouts with it at the Kooragang drag strip! My 1974 FJ40 with a 327 from a HK in it used to lift the front wheels off the ground. Used to beat all the local hot 4cyl cars of the day like turbo Lasers etc.



Old Kooragang Island, many many a night were spent there when I was young and dumb. Now all the clowns go to HEZ, 800m from my back yard :evil: :evil:
"Those who do not remember the past are condemned to repeat it"
George Santayana

E-Mail: pbialasinski@bigpond.com
Phone: (0407) 237723
User avatar
Skrewdriver
 
Posts: 515
Joined: Sat, 19 Nov 2011 9:21 +0000
Location: Weston NSW

Re: Buying a blown 1kd

Postby Rob_Wood on Wed, 27 Jan 2021 1:51 +0000

Gipsy wrote:Gee Rob, I bet you wish you kept the Kombi now, they're worth a mint :D


Yeah, it wasn't the only vehicle I was sorry to let go of. Had my nuts dropped earlier I might even still have a few of them. :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Rob_Wood
 
Posts: 869
Joined: Mon, 21 Sep 2020 8:32 +0000
Location: NSW

Re: Buying a blown 1kd

Postby Gipsy on Thu, 28 Jan 2021 5:26 +0000

Yeah I took a walk through the car museum at Birdwood South Australia and I once owned most of the cars there :lol: :lol:

Rob, check your pm messages
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2146
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Buying a blown 1kd

Postby Gipsy on Thu, 28 Jan 2021 5:29 +0000

Anyone been to the Birdwood museum? Well worth the effort. In the Adelaide Hills.
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2146
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Buying a blown 1kd

Postby dave g on Sun, 31 Jan 2021 8:40 +0000

Yes it been a while back they keep changing the car around
Well worth the look.
Stop by the rocking horse
And the chocolate factory
Mount lofty
Keeps the young ones happy to.
Doesn't do anything for the wallet.
dave g
 
Posts: 725
Joined: Fri, 18 Oct 2013 6:59 +0000

Re: Buying a blown 1kd

Postby dave g on Sun, 31 Jan 2021 8:59 +0000

Gipsy how you go from a buying a blowm 1kd to a museum.
:oops: :lol:
dave g
 
Posts: 725
Joined: Fri, 18 Oct 2013 6:59 +0000

Re: Buying a blown 1kd

Postby Gipsy on Mon, 01 Feb 2021 5:08 +0000

:lol: it's called 'conversation' Dave, I do it a lot, helps pass the time when following some threads ;)
You might notice others do it here too :D you might even notice it on this thread if you take the time to read right through so I'm not exclusive, rather I'm inclusive!
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2146
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Buying a blown 1kd

Postby Gipsy on Mon, 01 Feb 2021 5:51 +0000

dave g wrote:Yes it been a while back they keep changing the car around
Well worth the look.
Stop by the rocking horse
And the chocolate factory
Mount lofty
Keeps the young ones happy to.
Doesn't do anything for the wallet.


Mate if you don't like small-talk and off-topic why join in? Unless you are the word police... It's called 'CENSORSHIP'
Otherwise we might all just read the workshop manual and then we'll be an expert without any conversation.
Can't see how a rocking horse and chocolate factory fits in with buying a blown 1kd either.
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2146
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Buying a blown 1kd

Postby HK1837 on Mon, 01 Feb 2021 7:47 +0000

Gipsy wrote:Anyone been to the Birdwood museum? Well worth the effort. In the Adelaide Hills.


I was in there about 2 years ago, finally got them to open the bonnet on the WB Kingswood sedan. Glad I did as it is chassis number AWB00001A. They are building a new wing to house all the remaining GMH and Holden records, so looks like I will have a lot more trips and time to spend in South Australia. I still have some big holes in my research to fill.
HK1837
 
Posts: 1060
Joined: Tue, 17 May 2011 1:31 +0000

Re: Buying a blown 1kd

Postby Gipsy on Mon, 01 Feb 2021 8:02 +0000

Yep I was there about then too, the wb Kingswood had a broken bonnet catch cable so it was closed. The whole row from the fj ute right through to the Leyland p76 and the sandman once sat in my driveway. And the little Austin a30 with the surfboard on top, and the vw beetle. Watched Peter Brock race the a30 with a Holden red motor too.
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2146
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Buying a blown 1kd

Postby dave g on Mon, 01 Feb 2021 3:05 +0000

Same people just can't take a joke
dave g
 
Posts: 725
Joined: Fri, 18 Oct 2013 6:59 +0000

PreviousNext

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 8 guests