Hi, I recently changed my clock spring/steering sensor on my 2011 Hilux, because the horn wasn't working. Since installing and doing a zero point reset the slip indicator has started kicking in on on slight bends on good roads. Scared the shit out of me the first time. I have techstream ND it's not showing any codes.
Any ideas?
Slip indicator coming on after clock spring change
3 posts
• Page 1 of 1
Slip indicator coming on after clock spring change
by Noluxury on Wed, 28 Aug 2019 10:53 +0000
- Noluxury
- Posts: 2
- Joined: Mon, 26 Aug 2019 7:51 +0000
- Location: Ireland
Re: Slip indicator coming on after clock spring change
by Spitfia on Thu, 29 Aug 2019 9:17 +0000
Did you get one that is compatible with VSC?
YOU LOOKIN AT MY EYE?!!!
MY10 2011 SR Hilux DC, Steinbauer Module, 2" lift, BFG AT 265/75R16 etc. etc. etc.
MY10 2011 SR Hilux DC, Steinbauer Module, 2" lift, BFG AT 265/75R16 etc. etc. etc.
-
Spitfia - Posts: 262
- Joined: Sat, 28 May 2016 1:46 +0000
- Location: Perth, WA
Re: Slip indicator coming on after clock spring change
by Noluxury on Thu, 29 Aug 2019 2:44 +0000
Yep, it's the exact same model with steering angle sensor on the back.
- Noluxury
- Posts: 2
- Joined: Mon, 26 Aug 2019 7:51 +0000
- Location: Ireland
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 36 guests
