NewHilux.net

by **JasonGriffo** on Mon, 04 Feb 2013 8:29 +0000

Have 07 sr hilux tub has no down points just some picks or info where to put them would be great has tub liner

by **Steve9R** on Mon, 04 Feb 2013 9:06 +0000

ARB sell the rails..

http://www.arb.com.au/products/general- ... cessories/

Steve

by **83DRH** on Thu, 14 Feb 2013 11:18 +0000

Yep I have used those tie down points in the tray of my hilux, to secure fridge and space cases.

Very easy to install, and with a rubber tray matt fitted the tie down points sit flush with the top of the matt so won't damage other objects carried in the tray when the tie down points are not in use

Good gear!

Doug

by **SRD4D** on Thu, 14 Feb 2013 5:56 +0000

I bolted 6 x m12 eye bolts evenly spaced around the tub,with a 8mm support plate underneath, they arent going anywhere anytime soon..,will mount my draws to these when i knock them up soon as well.

by **Stu.wrf450** on Thu, 14 Feb 2013 6:19 +0000

Slide and lock system is the way to go. Got a tub liner and hard cover very got for tiring fridge n boxes down. Sits flush with the tub liner. $80 from arb for 2 x 1200 lengths. Should come out stock

by **weazel32** on Thu, 14 Feb 2013 7:53 +0000

I installed the Toyota D-rings (Part No. PT278-35054) from the Tacoma I think in the back of my SR. They work really well for me.

by **S.Mac** on Fri, 15 Jan 2016 6:44 +0000

Hey weazel32 - got any pics of your tie downs?

by **Richard** on Fri, 15 Jan 2016 11:26 +0000

S.Mac wrote:Hey weazel32 - got any pics of your tie downs?

Mac, see here .... http://puretacoma.com/exterior-c-377/drings-p-4733.html these are the tie downs Weazel has.

Richard

by **S.Mac** on Fri, 15 Jan 2016 10:10 +0000

I have a 2010 SR5 with tub liner and wondering if I can cut a hole in tub liner and bolt these sort of things in

by **10 luxxxx** on Fri, 15 Jan 2016 11:19 +0000

Yep you can. Bolt holes are in each corner.

by **patton** on Sat, 16 Jan 2016 12:17 +0000

and, how can i find where is the exact point to drill?? my bedliner doesnt have any mark in it. :roll:

by **10 luxxxx** on Sat, 16 Jan 2016 8:08 +0000

Best off to try and pull the corners of your Liner in a bit to have a look mate.

by **Richard** on Mon, 18 Jan 2016 10:31 +0000

The ARB option ...

by **bairdy380** on Tue, 19 Jan 2016 10:15 +0000

I second the ARB...I've got full ones, cut some in half to fit behind wheel wells for fridges, I rate them highly. Very functional....can be a bit tight when dirt/bark etc gets in the track...but nothing an old toothbrush doesn't fix!

by **flip9** on Tue, 19 Jan 2016 11:04 +0000

I used these eye bolts. They are removable.

One catch.. The tub is corrugated so you have to make sure the washer underneath has space to sit flat.

by **lyndon1706** on Wed, 20 Jan 2016 5:42 +0000

Crush some pipe and weld it between the factory corner tie downs

by **TDOS105** on Sat, 22 Jun 2019 10:48 +0000

Anyone got any photos of tie down rails installed on a SR Tub? I have a hilux sr with hard tonneau so unable to strap anything inside

Any suggestions?

Cheers

by **TDOS105** on Thu, 04 Jul 2019 8:24 +0000

Bringing this one alive again as I have recently just got a sr

I have a hard tonneau and a ute liner.

Anyone have any images or a new link for the rails and how to install??

Or any other ideas how to tie anything down in the tub

Cheers

NewHilux.net

Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points

Re: Tie down points