Scan Gauge II

General discussion of basically anything Hilux related

Re: Scan Gauge II

Postby Gipsy on Thu, 04 Aug 2016 11:27 +0000

Should be OK but I say buy one, or find someone who has one and plug it in. It either works or doesn't so taste and try before you buy
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2135
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz


 

Re: Scan Gauge II

Postby rory18 on Thu, 04 Aug 2016 12:56 +0000

If it's Euro4 it will be fine. That's when the made the Hilux obd2 compliant
User avatar
rory18
Platinum Subscriber
 
Posts: 777
Joined: Thu, 20 Oct 2011 10:10 +0000

Re: Scan Gauge II

Postby apSlain on Thu, 04 Aug 2016 1:04 +0000

Gipsy wrote:Should be OK but I say buy one, or find someone who has one and plug it in. It either works or doesn't so taste and try before you buy

Cheers Gipsy. I'll have to see if someone local has one I can try. I finally got a hold of them and they said if the manufacture year is not 2007, it won't work.

I'm still hopeful it does work though as I believe mine is an early new build i.e. Euro4, ODB2 over M-ODB...

Actually, can anyone confirm that ALL Euro4 'Lux's are ODB2, not M-ODB?
Check out Slain's Overlander, a perpetual work-in-progress.
User avatar
apSlain
 
Posts: 271
Joined: Mon, 06 Jan 2014 10:06 +0000
Location: New South Wales, Australia

Re: Scan Gauge II

Postby Gipsy on Thu, 04 Aug 2016 2:27 +0000

The plug in point is a clue... look at a later model, of any vehicle... if the plug looks the same it is likely to be compliant because the obd2 is generic to all recent models. The plug is under your steering column.

Do a Google for obd2 you can see the plug ... it is generic for all obd2 you can get an elm327 Bluetooth one for $6
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2135
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Scan Gauge II

Postby FD2407 on Mon, 23 Jan 2017 8:03 +0000

Has anyone on the forum used one of the Ultragauge scan gauges on an 05 KUN26 D4D 1KD-FTV?
If so, do they recommend this product or should I re-direct my attention towards the 1KD Performance Monster max?
I'm of the understanding that the Ultragauge setups are just for monitoring and not map changing.
Cheers for any advise.
FD2407
 
Posts: 7
Joined: Sat, 21 Jan 2017 7:03 +0000
Location: Rockingham, WA

Re: Scan Gauge II

Postby sharp018 on Wed, 14 Jun 2017 4:04 +0000

i have a Toyota HIlux 2006 Before October build date 12/05

Anyway my scan gauge works completely fine, but no other OBD2 scan tool will work

all i want to know is what protocol is the scan gauge? I have a copy of TeachStream on my mini laptop but need to buy a cable and there is so many different types

I been told firstly its OBD1 but the obd1 plug looks different and smaller then the ob2 and my plug is 17 Pin as any obd2 will fit the socket

I did buy a couple of bluetooth cheapo plug ins off eBay, that i pluged in and my phone found them and i go to connect but fails!

Doing my head in!
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: Scan Gauge II

Postby flip9 on Wed, 14 Jun 2017 4:28 +0000

sharp018 wrote:I did buy a couple of bluetooth cheapo plug ins off eBay, that i pluged in and my phone found them and i go to connect but fails!

Doing my head in!


The BT module wont connect to your phone or the app wont connect to the ECU?

Ive got the cheapo ELM327 Bluetooth OBD2 modules from eBay and mine works fine with Torque on my tablet.
User avatar
flip9
 
Posts: 269
Joined: Tue, 05 May 2015 12:33 +0000
Location: Sydney

Re: Scan Gauge II

Postby sharp018 on Wed, 14 Jun 2017 4:57 +0000

Hey mate on my phone it shows up it's there I pair my phone to it open a OBD app. Go to connect but it looses connection and or times out

That's what mine is a ELM327

On mine when I go to connect it says connecting to ELM327 1.5V

So not sure is the 1.5V is there version of the Bluetooth unit, I tried number of apps but not Torque I'll give it a go tomorrow and see what happens
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: Scan Gauge II

Postby sharp018 on Thu, 15 Jun 2017 12:30 +0000

These are the 2 units I'm trying to use on my

2006 3ltr Hilux ( early 2006 model )
5/12/15

Image

They don't work I'll upload more pics of my problems

Screen shot to show my phone picks up the Bluetooth obd device ( asks me to put code in to pair ) which I do


Image


Then I open an app to connect and this happens

Image
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: Scan Gauge II

Postby sharp018 on Thu, 15 Jun 2017 12:49 +0000

My smart gauge works perfectly fine

Image


Image
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: Scan Gauge II

Postby sharp018 on Thu, 15 Jun 2017 12:58 +0000

i know im talking to my self a bit here

But i have found what may be the *Protocols*? for 2005 onwards

https://www.boutiqueobdfacile.com/klavk ... -b645.html

♦ ISO 15765-4 (CAN),
♦ ISO 14230-4 (KWP2000 slow et fast init),
♦ ISO 9141-2,
♦ SAE J1850 VPW,
♦ SAE J1850 PWM,

No exactly sure what these mean, but says it will cover any brand Diesel from 2004 On wards
and petrol from 2001 onwards
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: Scan Gauge II

Postby flip9 on Thu, 15 Jun 2017 5:34 +0000

I have the blue one in your pic, maybe a different version though?

Torque does mention cheap ELM327 clones may not work.

Heres the Adapter info from torque:

Image
Image
User avatar
flip9
 
Posts: 269
Joined: Tue, 05 May 2015 12:33 +0000
Location: Sydney

Re: Scan Gauge II

Postby sharp018 on Fri, 16 Jun 2017 4:07 +0000

Not 100% sure mate as it says same as mine

Anyway I did some research with the ELM327 connector nowhere mentions it's supports ISO 9141-2

I looked back at Teach stream cable got all protocols to supports from 1996 Toyota on

So I'll just have to wait for the cable to come then sus it out with teach stream. My smart gauge pretty much reads everything these Bluetooth gizmos do. Just want to use the teach stream more for live data and injector values


By the way my sister has a Mazda 3 06 model and I use that bigger OBD connector in photo above and it worked fine. However that elm327 connector didn't work but I think that's more because her car is more updated I dunno. But I tired a few apps like Dash Command and ScanMaster

I found the scan master really usful and easy to use

DashCommand is ok but it is a bit slow for readings as I can be doing 40km and it will slowly increase from 20km

Though put it in gps mode and do real time speed you can do 1/4 mile runs and Nort to 60 runs. Fair to say I tied this for the sake of it but the sis don't know lol
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: Scan Gauge II

Postby Herb79 on Thu, 28 Jun 2018 6:40 +0000

I have the same 177 come up on mine??
Herb79
 
Posts: 5
Joined: Thu, 28 Jun 2018 4:20 +0000
Location: Orbost Victoria

Re: Scan Gauge II

Postby William_Foster on Tue, 16 Oct 2018 8:46 +0000

Just a random question, would it be possible to substitute the standard trip computer for a Scan Gauge II?
2013 Toyota Hilux SR5
4x4 Manual Diesel
User avatar
William_Foster
 
Posts: 248
Joined: Sat, 11 Jan 2014 3:58 +0000
Location: Northern Territory

Re: Scan Gauge II

Postby Andyfive on Wed, 17 Oct 2018 6:55 +0000

I’d say yes, as it gives you the same info. Just need to keep it plugged in.
Andyfive
 

Re: Scan Gauge II

Postby northqlder53 on Fri, 19 Apr 2019 11:00 +0000

Will the Scanguage 2 read my Auto Transmission temps on my 2014 D4D Hilux. Model is KUN26R. Also will it be using power when the motor isn’t running.
northqlder53
 
Posts: 1
Joined: Fri, 19 Apr 2019 10:30 +0000
Location: Sunshine Coast.Queensland

Re: Scan Gauge II

Postby mark409 on Sat, 20 Apr 2019 6:57 +0000

No
If u go to scangauges site ,only models above 2016,
What i can see ,i was checking it out for EGT, and that as well was only 2016 models upward.
mark409
Platinum Subscriber
 
Posts: 71
Joined: Mon, 07 Oct 2013 8:38 +0000
Location: perth Wa

Re: Scan Gauge II

Postby Gipsy on Sun, 21 Apr 2019 9:13 +0000

northqlder53 wrote:Also will it be using power when the motor isn’t running.


No it gets power from the engine on power so when the engine is off no power is consumed. And for egt you need a probe into the turbo dump pipe and a gauge of some kind. N80 has egt tho. While you are looking for that, buy a transmission temperature gauge as well ;)
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2135
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Scan Gauge II

Postby DeadlyBeast on Tue, 23 Apr 2019 7:25 +0000

northqlder53 wrote:Will the Scanguage 2 read my Auto Transmission temps on my 2014 D4D Hilux. Model is KUN26R. Also will it be using power when the motor isn’t running.

Yes it will work on your model: ATF Reading on Scan Guage II

Use the code from the 2nd to last section (Hilux 5 speed auto diesel only). Exclude the last zero on the final code
http://www.scangauge.com.au/toyota-x-gauges/
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

PreviousNext

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 11 guests