NewHilux.net

soooo how is the gauge does it work well?

According to Jason @spyroeast, the ScanGauge II will not fit our Hilux.

He actually ordered 2 units and will now have to return it back.

It just won't communicate with the OBD II.

Cheers

Brendon

weird, lots of prado people seem to have this.i would of thought our ECU's are much the same.
i know early diesel prado's it might not have worked on properly due to toyota changing between ODBD II to SCANC in 05 (scanguage supports scanc so should work on those models)
.its not because of the dp chip is it?

did u get a unit to try it?
if it didn't work on the diesel have access to a petrol one to try?

reading a few posts from the guy who sells it in australia, seems to be around late 05 early 06 that toyota's started to work.

perhaps becuase you get teh 2.5 diesel the ECU is not the same =/

jcarter,

I didn't try it out as Jason tried it out himself.

As you said, maybe it's due to the 2.5 ECU which is different from the 3.0 litre that you use in OZ.

We don't get petrol versions Hilux over here. We only have one version, the underpowered 2KD-FTV 2.5 D4D!

cry.....cry.....



Cheers

This looks great- can anyone confirm if they will fit and work on the 07 diesels? They are available for $215 at www.wooders.com.au/
troyco

hi troyco i emailed them yesterday this is the response!/

Joshua,
Yes it is compatible.
I am not 100% certain of the exact month but its within the 05/06 is the
best we have been able to identify.
Cheers
David Woodley
Wooders Garage Pty Ltd
www.wooders.com.au


i believe he will accept a return if it dosnt work.

Guys, i bought the Scan Gauge II and tried it on my 06 Hilux 2.5D4D. It justs keeps saying connecting and it just hangs there. It cant get into the main menu. So am stuck with two units of Scan Gauge II !!!

Jason,

Can you return it to the Singapore dealer since it won't fit for a refund?

When are we going for a drink mate? I'm waiting for you!

Cheers

Brendon

I have a Scanguage 2 - it works perfectly.
07 Hilux Diesel Auto.
The fuel consumption was a bit out to begin with, but it seems to be correcting its reading with time.
All other functions are perfect - I use the speed reading alot as the factory speedo is way out as we all know...

I recommend the Scanguage..

Sam.

HiruxHijinx,

What is the capacity of your Hilux ?? 4.0 or 3.0 ?? Ive have read forums and it seems most Aussie Toyotas like Prados are compatible to the Scan Gauge II. Well if it works then i have two units for sale !!! Cut my loss if possible !!

I have the 3.0L Diesel Turbo
it is handy, the most interesting functions I look at are:
- Intake Air Temp
- Engine Water Temp
- Speed
- Litres Per Hour
- Litres per 100km

But it does quite a bit of other stuff too, has trip computer, holds maximums / peaks, all that sort of stuff.

I want one. Love gauges and trip computers etc. So where did you get yours from Sam ?

Andrew

Hiruxhijinx,
where did you get yours from? and what was the damage?
cheers
troyco

I got mine from Never Enough Auto
www.neverenoughauto.com
from memory i think i paid about $190
and shipping took under 2 weeks

Sam.

So Sam, where did you mount the display?

where the ashtray is, fabricated a bracket to screw it there, and ran the cable in behind the dash so it looks all tidy.
sticks out a bit, not ideal, but i couldnt find anywhere else good to put it..

Sam.

Hey Sam, excuse my ignorance but where does it plug into?
Colin

Would it mount nicely if you only had a single din stereo and mounted in the spare slot?

I think it might connect to the OBD connector??

Cheers
Matt

Yes, it connects to the OBD II connector just below the steering wheel.

Cheers

Brendon

Is there any risk of voiding warranty any any way, by using Scangauge ?

Or should I say has anyone asked Toyota or gone through a service with one connected ?

Also are the units displayed changeable to km and Litres ? The Wooders site has (MPH) after mentions of speed ?

Andrew