NewHilux.net

by **Steve9R** on Wed, 21 Nov 2007 8:13 +0000

Whos put in extra tie down points?
where / how did you attach them ?

Im finding the standard 4 points in the tub are too high up...

Steve

by **camwill69** on Wed, 21 Nov 2007 6:39 +0000

Steve9R,
I put in the ARB tie down system. It runs along the floor, 1200mm long on either side with movable tie points. Bolts in with a big washer under the tray and is good for 750kg each (so they say).

I have a Toyota tray liner and the track sits flush with it, so no intrusion on the floor. Works great. Cost about $100 from memory.

Will try and get a photo if you like.

Regards,
Camwill69

Thanks Stuk for showing me the product.

by **Steve9R** on Wed, 21 Nov 2007 7:32 +0000

hmmm.. that sounds ideal..

yes please a pic would be great..

ta
Steve

by **HiruxHijinx** on Thu, 22 Nov 2007 2:37 +0000

Pics would be great!
Speaking of the Toyo tub liner, has anybody had any issues with condensation / rust underneath it, or do you think drilling the metal tub underneath the liner would increase rust risk?
I have the liner, and just don't know how well it is drained, or if this is even an issue worth worrying about, I haven't taken it off to have a look under as yet... Anyone got any stories?

by **Macca** on Thu, 22 Nov 2007 3:28 +0000

My canopy sits on the tub liner so I dont think I can get it out with out a lot of work. I had thought of trying to spray a rust preventative up there but really have no idea if I can do anything.
Macca

by **camwill69** on Thu, 22 Nov 2007 4:45 +0000

Guy's,
I will attemt to post some photo's tomorrow as I did not have my transfer lead at work today.
Regards,
Camwill69

by **whackywombat** on Thu, 22 Nov 2007 6:56 +0000

This is what I use. It's from ARB 8-)

by **camwill69** on Thu, 22 Nov 2007 6:56 +0000

Thats the one! Thanks Whackywombat

by **Steve9R** on Fri, 23 Nov 2007 4:05 +0000

excellent..

went to ARB on the way home tonight and bought the 2 x rails and 4 x clips for them.. exactly $100..

thanks guys
Steve

by **camwill69** on Sat, 04 May 2024 12:18 +0000

You will not regret that purchase. What i did is rust proofed the holes (Shell Ensis fluid wax) that I drilled and then sealed them with Sika so rust and dust did not become an issue.
There is only enough bolts for every second hole so I put a Series 500 screw in the other one's to locate it while I did the bolt holes.

Make sure you get any swarf out from under the liner after you drill the holes.

Regards,
Camwill69

NewHilux.net

Extra tie down points in DC tub ?

Extra tie down points in DC tub ?

Extra tie down points in DC tub ?

Extra tie down points in DC tub ?

Extra tie down points in DC tub ?

Extra tie down points in DC tub ?

Extra tie down points in DC tub ?

Extra tie down points in DC tub ?

Extra tie down points in DC tub ?

Extra tie down points in DC tub ?