Page 1 of 1

93 ln106 Injector pump timing

PostPosted: Sat, 06 Jul 2019 6:58 +0000
by Leroyangus
Gidday,
Recently had the seals replaced by a diesel mechanic in the injector pump on my 2.8 ln106. Have put everything back together and it wont rev above 1800rpm. Would this most likely be the timing out by a tooth or could it be the position of the pump on the block? No black smoke from exhaust.
Cheers

Re: 93 ln106 Injector pump timing

PostPosted: Sun, 07 Jul 2019 4:37 +0000
by Ozwaz
Check the governor spring under the top cover for correct position.