Bush size

Bush size

Postby dave g on Sat, 26 Dec 2020 7:26 +0000

Hi do's anybody know the size off the front bush size on the back springs they are ome do's the pedders bush's fit.the ute is a sr5 dc 1996.
Arb are out of stock
Any help would be great
Thanks
David
dave g
 
Posts: 424
Joined: Fri, 18 Oct 2013 6:59 +0000


 

Re: Bush size

Postby dave g on Tue, 29 Dec 2020 5:32 +0000

ARB OUT OF STOCK
Pedders closed
Ironman closed
Got same from Burson
Got them on spec as a stock size luck happen they fit
40mm
Parts #spf2231-4k
#spf0972k
Front fitted straight in
Haven't fitted the back yet.
Hope this helps same one.
Last edited by dave g on Tue, 29 Dec 2020 8:13 +0000, edited 1 time in total.
dave g
 
Posts: 424
Joined: Fri, 18 Oct 2013 6:59 +0000

Re: Bush size

Postby Rob_Wood on Tue, 29 Dec 2020 6:10 +0000

Just make sure there's absolutely NO slop. Depends on the bushes and springs, but some even need to be pressed in. If there's any slop at all they won't last 2 minutes.
Rob_Wood
 
Posts: 156
Joined: Mon, 21 Sep 2020 8:32 +0000
Location: NSW

Re: Bush size

Postby dave g on Tue, 29 Dec 2020 7:41 +0000

Had to press in
Father, 2 brother's as mechanic's
Built race cars and raced bikes for about 20 years
So pick up same tricks on the way.

Large g clamp 2 small pieces of flat steel and a large socket and you have your press no nead to pull the spring out.
dave g
 
Posts: 424
Joined: Fri, 18 Oct 2013 6:59 +0000

Re: Bush size

Postby Rob_Wood on Thu, 31 Dec 2020 5:27 +0000

dave g wrote:Had to press in
Father, 2 brother's as mechanic's
Built race cars and raced bikes for about 20 years
So pick up same tricks on the way.

Large g clamp 2 small pieces of flat steel and a large socket and you have your press no nead to pull the spring out.


Cool, there's a "work-around" for most jobs, glad you're doing well.
Rob_Wood
 
Posts: 156
Joined: Mon, 21 Sep 2020 8:32 +0000
Location: NSW


Return to Suspension

Who is online

Users browsing this forum: No registered users and 1 guest