Page 1 of 1
Bush size
Posted:
Sat, 26 Dec 2020 7:26 +0000by dave g
Hi do's anybody know the size off the front bush size on the back springs they are ome do's the pedders bush's fit.the ute is a sr5 dc 1996.
Arb are out of stock
Any help would be great
Thanks
David
Re: Bush size
Posted:
Tue, 29 Dec 2020 5:32 +0000by dave g
ARB OUT OF STOCK
Pedders closed
Ironman closed
Got same from Burson
Got them on spec as a stock size luck happen they fit
40mm
Parts #spf2231-4k
#spf0972k
Front fitted straight in
Haven't fitted the back yet.
Hope this helps same one.
Re: Bush size
Posted:
Tue, 29 Dec 2020 6:10 +0000by Rob_Wood
Just make sure there's absolutely NO slop. Depends on the bushes and springs, but some even need to be pressed in. If there's any slop at all they won't last 2 minutes.
Re: Bush size
Posted:
Tue, 29 Dec 2020 7:41 +0000by dave g
Had to press in
Father, 2 brother's as mechanic's
Built race cars and raced bikes for about 20 years
So pick up same tricks on the way.
Large g clamp 2 small pieces of flat steel and a large socket and you have your press no nead to pull the spring out.
Re: Bush size
Posted:
Thu, 31 Dec 2020 5:27 +0000by Rob_Wood
dave g wrote:Had to press in
Father, 2 brother's as mechanic's
Built race cars and raced bikes for about 20 years
So pick up same tricks on the way.
Large g clamp 2 small pieces of flat steel and a large socket and you have your press no nead to pull the spring out.
Cool, there's a "work-around" for most jobs, glad you're doing well.