Show us your Tyre / Rim combo...

[Merkin]

Hey Guys,
i've done a search, but couldnt find a thread with just photos of the wheels/rims everyone is running.
I'd start this off, but im only running standard SR5 rims at present , and im after ideas of what looks good/is practical.
It'd be good if you could label the pics - make/model and size of both tyre and rim, whether you have a lift, etc.
cheers!
Merkin.

[Skog07]

Merkin have a look in the post 05 tyre forum and look for a sticky that says "tyre and wheel bible WIP" or something similar. I'm I'm not near a computer at the moment to link it for you. Will lock and link it when I can. Cheers Mark

[Skog07]

viewtopic.php?f=27&t=3765&start=180
Try this thread Merkin its probably what your looking for cheers Mark

[Loosey]

Looking to run a combo like this in the future.

[Merkin]

Thanks for that mark.

I have had a look at that thread, and some great info there, but not too many of the posts have photos- which is what I'm after.
Cheers.

[lach89]

Fuel Offroad Octane 17x8.5 +14 offset, 285/75/17 MTZ's

40mm suspension, 50mm body lift

[cuzo4x4]

ROH Rims 0 off set KUMHO 265x75x16 The Centres Stick out a bit and I have scratch one up pretty bad, food for thought when I buy my next set, but rims havent been hit at all yet,

[scottsr20]

Pro comp 17x 8.5 I had the mounting face machined to make them + 10 offset and 285/70/17 KM2s.

[timothyg]

I remember there's a member running walker Evans...damn nice wheels

[wakil]

Has anyone run MT Classic Locks or Black Classic Locks with chrome ring to get the same look as scottsr20?
I dunno whether its just me but his tire have a good sorta wide look to them despite being a 285 and wondering if its the wheels with mock beadlocks that help that look?

[Stef]

18x9 fuel hostage with -12 offset. Sadly will have to go to be replaced with a smaller offset to fit 35s


Sent from my iPhone using Tapatalk 2

[wakil]

limit steering and keep sway bar? i reckon itd have to be close to working? Goons was on -22, i wouldnt be too quick to sell em

[Stef]

limit steering and keep sway bar? i reckon itd have to be close to working? Goons was on -22, i wouldnt be too quick to sell em

Something to consider but clearance would be a serious issue. Not to mention loads on spindles and hubs.. I'm hoping to go a 12.5" 35 so will be killer..

Was goon running 35s on IFS with -22? Impressive


Sent from my iPhone using Tapatalk 2

[hybrid]

KMC XD series running BFG 265/75/16's.

[BIGFOOTJR]

limit steering and keep sway bar? i reckon itd have to be close to working? Goons was on -22, i wouldnt be too quick to sell em

Something to consider but clearance would be a serious issue. Not to mention loads on spindles and hubs.. I'm hoping to go a 12.5" 35 so will be killer..

Was goon running 35s on IFS with -22? Impressive


Sent from my iPhone using Tapatalk 2

I'm waiting on my walker evans that are 17x8.5 with -19 offset. Going to be wrapped in 35x12.5 Micky T ATZ 4-Ribs. Have got spindle gussets and MR Flares.

Although goon doesn't have spindle gussets he will most likely need to replace them in the near future.

[Stef]

Far out! Some serious stance! I'd probably need to cut my firewall back significantly and relocate the body mount an inch further back!


Sent from my iPhone using Tapatalk 2

[BIGFOOTJR]

Far out! Some serious stance! I'd probably need to cut my firewall back significantly and relocate the body mount an inch further back!


Sent from my iPhone using Tapatalk 2

Piece of piss with the firewall, body mount is tricker but whatever it takes.

[Stef]

Will be watching closely to see how you go about it would love to keep the monster wide stance


Sent from my iPhone using Tapatalk 2

[will's hilux]

[wakil]

Yeah, he's got a 1" body lift too. I'm running MR and a 3" bl and I'm looking at limiting steering like max and going some -6 or -12 mickey thompsons, just can't decide on wheels, but they'll almost definitely be wrapped in 35" claws.

I think there was another bloke on here with -22 as well?. Be tough without slightly limiting steering. Are you wanting to keep ya sway bar?

Sorry for the thread hi-jack, I just love talking about 35's