Page 1 of 1

Nitto dune grappler

PostPosted: Tue, 27 Nov 2012 6:52 +0000
by Billis123
Hey guys I have searched around the forum and are yet to find any info or feedback on the nitto dune grapplers. I have just recently bought a 2012 sr5 exta cab and I was looking at putting some 285/55r20 dune grapplers under it and I was just wondering weather anyone has had any experience with these ?? I also wanted to wrap them around a set or kmc rockstar rims as I think they look pretty fat!!

Cheers,

Re: Nitto dune grappler

PostPosted: Tue, 27 Nov 2012 7:13 +0000
by Loosey

Re: Nitto dune grappler

PostPosted: Tue, 27 Nov 2012 8:20 +0000
by Downesy
No sure if a topic has been started yet, but it would be good to know what people think of which is the best Sand tyre is at the moment ?

Re: Nitto dune grappler

PostPosted: Wed, 28 Nov 2012 8:38 +0000
by Billis123
Thanks for the reply loosey. I was also wondering what the right offset would be for the 20 's to minimize trimming? I will also be running a 2 inch kit so this shall help.

Re: Nitto dune grappler

PostPosted: Wed, 28 Nov 2012 8:57 +0000
by helmut79
Billis123 wrote:Thanks for the reply loosey. I was also wondering what the right offset would be for the 20 's to minimize trimming? I will also be running a 2 inch kit so this shall help.


Mate I think you will be limited by what offset the Rockstars come in. From what I can remember they are either p18 or -12 correct?? If this is correct -12 will mean alot of trimming of the mount, flare, pinch weld etc. The p18 would be better but the tyre may rub on the sway bar, chassis.

Re: Nitto dune grappler

PostPosted: Wed, 28 Nov 2012 9:08 +0000
by D4D luxy
The negative 12 will look sick! Good luck with the fitment!