Nitto dune grappler

[Billis123]

Hey guys I have searched around the forum and are yet to find any info or feedback on the nitto dune grapplers. I have just recently bought a 2012 sr5 exta cab and I was looking at putting some 285/55r20 dune grapplers under it and I was just wondering weather anyone has had any experience with these ?? I also wanted to wrap them around a set or kmc rockstar rims as I think they look pretty fat!!

Cheers,

[Loosey]

http://www.offroaders.com/tech/AT-MT-Ti ... appler.htm

[Downesy]

No sure if a topic has been started yet, but it would be good to know what people think of which is the best Sand tyre is at the moment ?

[Billis123]

Thanks for the reply loosey. I was also wondering what the right offset would be for the 20 's to minimize trimming? I will also be running a 2 inch kit so this shall help.

[helmut79]

Thanks for the reply loosey. I was also wondering what the right offset would be for the 20 's to minimize trimming? I will also be running a 2 inch kit so this shall help.

Mate I think you will be limited by what offset the Rockstars come in. From what I can remember they are either p18 or -12 correct?? If this is correct -12 will mean alot of trimming of the mount, flare, pinch weld etc. The p18 would be better but the tyre may rub on the sway bar, chassis.

[D4D luxy]

The negative 12 will look sick! Good luck with the fitment!