How to remove centre blank switch panel

How to remove centre blank switch panel

Postby truckasauras on Sun, 21 Sep 2014 8:22 +0000

G'Day fellow hilux'ers,

I am trying to access this panel to install a winch isolator switch and a winch in out switch...

My question is:

How the bloody hell do I remove this panel?!

I had to shove my hand behind the panel to push out the first blank plate. any assistance would be appreciated.

Cheers in advance ya'll


Image
Favourite place to go bush..... The bedroom! ;) :D
User avatar
truckasauras
 
Posts: 27
Joined: Thu, 20 May 2010 11:36 +0000
Location: Wodonga, Victoria AUSTRALIA


 

Re: How to remove centre blank switch panel

Postby 10 luxxxx on Sun, 21 Sep 2014 9:17 +0000

just give it a pull mate it held on with those little yellow clips or a small screw driver down the side will do it
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: How to remove centre blank switch panel

Postby truckasauras on Sun, 21 Sep 2014 5:12 +0000

oh ok.

Thanks 10 luxxxx,
Favourite place to go bush..... The bedroom! ;) :D
User avatar
truckasauras
 
Posts: 27
Joined: Thu, 20 May 2010 11:36 +0000
Location: Wodonga, Victoria AUSTRALIA

Re: How to remove centre blank switch panel

Postby Dewbs on Mon, 22 Sep 2014 5:55 +0000

I put a small flat head screw driver through the gap above it roughly above the outside switch holes and pull, this is because there is a clip at roughly this spot
Dewbs
 
Posts: 97
Joined: Fri, 27 Dec 2013 8:21 +0000


Return to Tips & Tricks

Who is online

Users browsing this forum: No registered users and 2 guests