removal of cv

Gearboxs, Transfers, Tailshafts, Diffs, axles and CVs

removal of cv

Postby chivers95 on Thu, 13 Mar 2014 7:01 +0000

he all ive got the cv shafts out and the driver side cup out of the diff but cant get the cup outs of the driver side any tips on how peope have done theres I got a small crow bar and had it just on the edge of the cup opposite the boot and still no luck on the passenger side HHHEEELLLLPPPPP forby trip on the weekend
i only struggle the first five days after my weekend
chivers95
 
Posts: 87
Joined: Sun, 18 Nov 2012 9:27 +0000
Location: newcastle nsw


 

Re: removal of cv

Postby mattwhite on Thu, 13 Mar 2014 7:06 +0000

Tap it with a hammer and your pry bar.
User avatar
mattwhite
 
Posts: 1814
Joined: Tue, 12 Aug 2008 1:00 +0000
Location: Mandurah WA

Re: removal of cv

Postby chivers95 on Thu, 13 Mar 2014 7:08 +0000

yr pretty much what im doing because or dogey boots I got sold but surprisingly being refunded keep poping off and filled cv with sand so the were trashed after and now just putting it new cvsall together

:? :oops:
i only struggle the first five days after my weekend
chivers95
 
Posts: 87
Joined: Sun, 18 Nov 2012 9:27 +0000
Location: newcastle nsw

Re: removal of cv

Postby packeteer on Fri, 14 Mar 2014 4:32 +0000

can somebody translate that? :P

:lol:
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: removal of cv

Postby chivers95 on Fri, 14 Mar 2014 5:04 +0000

To many drinks last night sorry haha :D
i only struggle the first five days after my weekend
chivers95
 
Posts: 87
Joined: Sun, 18 Nov 2012 9:27 +0000
Location: newcastle nsw

Re: removal of cv

Postby packeteer on Fri, 14 Mar 2014 5:08 +0000

heh, figured it was that or greasy covered hands and stress :)

hope it went well for ya
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: removal of cv

Postby chivers95 on Sat, 15 Mar 2014 2:55 +0000

Got new cvs in first day out both outer boots split what the f!@# is happening
i only struggle the first five days after my weekend
chivers95
 
Posts: 87
Joined: Sun, 18 Nov 2012 9:27 +0000
Location: newcastle nsw

Re: removal of cv

Postby packeteer on Mon, 17 Mar 2014 1:30 +0000

a picture or detailed description of your front end setup would help diagnose
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: removal of cv

Postby mattwhite on Mon, 17 Mar 2014 6:24 +0000

What are you fitting? New shafts? New boots? Genuine? I'd suggest they're just not clamped tight enough if they just fall off.
User avatar
mattwhite
 
Posts: 1814
Joined: Tue, 12 Aug 2008 1:00 +0000
Location: Mandurah WA

Re: removal of cv

Postby boxhead55 on Mon, 17 Mar 2014 6:40 +0000

I would say this is happening
At full flex your cv boot it touching the lower control arm bracket and it tearing them
Quite common with hight lifts Image

Hope this helps
User avatar
boxhead55
 
Posts: 2864
Joined: Sat, 15 Jun 2013 3:46 +0000


Return to Drive Train Components

Who is online

Users browsing this forum: No registered users and 5 guests