by tasibrett on Sun, 25 Jul 2010 3:52 +0000
You need to determine if its the solenoid contacts or the worn brushes
after removal, with jumper leads, attach the black to one of the mounting lugs. The red then gets jabbed onto the bolt next to the one you removed to get the battery cable off on the solenoid
. If the starter spins with a burst into life you need to replace the contacts in the solenoid. If you set sweet FA you have to replace the brushes which will require a large soldering iron or blow lamp, oxy.
My wife say's I am not completely useless, I can serve as a bad example for others