by Arlo on Fri, 15 Jul 2016 5:44 +0000
Mate,
I put spotties underneath (facing rearward) and ran the wire down through the sports bar. To do it I used the front bar (2014 SR5), drilled a hole underneath 45degrees facing rearward in the centre of the top bar - though you could do this anywhere. You'll also need to drill/cut a larger hole in the bottom of the plastic bracket holding the bar at either side you want to run the wire. From there I used a roll of tie wire to run through the hole to push through before you use it to pull electrical wiring in. Though it could be done with string if firm enough.
I hope this was of some help!
Arlo