Thought i would post some photos of a bit of home electrical work I have attemtped. This is the first time i have attempted this so if anyone has any suggestions fire away.
So i wanted a few extra accessory plugs in the cab for taking car of kids in back and a few dash accessories. So the idea was a dual plug (ciga and USB slots) at the rear and a singel plug in the front of the centre console. The power was coing from a new fuse block i installed under the hood.
So firstly i installed the plugs using 6mm twin core. I wired straight to the ciga socket first then used piggy back connectors to connect the USB and front ciga socket. Tried to keep it all neet with heat shrink. Routed the twin core along the bottom of the console, through the gear stick panel and then popped it through a small hole at front of gear stick panel into dash panel so it almost all hidden. Then routed the cable up behind the drivers pedals and through fire wall. Here are some photos.