the first pic is the loom from the reverse switch on the box and that is about all I have, i put volt metre on the connection and the top pin and lower right pin seem to be connected to the reverse switch on the box, as I nock it into and out of reverse i get a connection beep.
Now I cant see any loom in the dash so have no idea where this use to run to or has to go to and in the rear there seems to be only enough wires for what there
I have all indicators and brake and parkers and I can get the number plate light to work but for rego I need reverese any help would be grate
the pink wire must activate the reverse light
Need Help.
