Wiring loom

[Trent Stower]

Hi all
I have a cheap set of spot lights mounted to my bullbar and I am about to upgrade to lightforce 240 blitz.

Just wondering if I would need to run new cables or if the existing loom I have will work with the new set of lights. Any assistance will be great as I'm lost with electrical work. Thank you

[fullhouse]

How's the condition of the loom that's there?
I'd say use it

[Trent Stower]

It's 12 months old, installed by a professional. Would I possibly need to upgrade relays?

[lais817]

What size is the wire mate

[Mark23]

what watts is the old spotlights and what watts is the new lightforce spotlights?

[LJ1930]

If the new spot lights are a larger wattage than the old ones then yes.... Upgrade the wires on pin 30 and 87/87A on ya relay..plus the fuse that supplies that circuit... pin 85 &86 will be fine as they only power the relay coil and draw bugger all. Remember dont put a bigger rated fuse in if the cables current capacity is less than the fuse protecting it.. (cable burns before fuse blows)