Page 3 of 3

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Thu, 02 Jul 2015 6:51 +0000
by rds_929
Gunny wrote:Here is a little job i made myself...

The wire runs inside the pipe, up under the corner of the tray and through a grommet in to the back of the cab...
Image

Image

Image



looks awsome keen to shed anynmore light on how u made up the bracket for the bars

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Fri, 03 Jul 2015 4:21 +0000
by NZMarkb
Have a look at these on Aliexpress
I've ordered some just awaiting delivery (Slow but free)
http://www.aliexpress.com/item/3-Inch-B ... 82391.html
I'll post some photos when I get them fitted

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Fri, 03 Jul 2015 6:16 +0000
by martynvella
top idea, but im pretty sure the sports bars on the SR5 are 4 inch.
I need something exactly like that for a UHF antenna mount on the sports bar.

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Fri, 03 Jul 2015 6:49 +0000
by NZMarkb
martynvella wrote:top idea, but im pretty sure the sports bars on the SR5 are 4 inch.
I need something exactly like that for a UHF antenna mount on the sports bar.


Mine is only 3 inch (I did check before ordering) but as a lot of Toyota's accessories are from local suppliers over here (NZ) it may pay to check yours

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Sun, 05 Jul 2015 6:27 +0000
by martynvella
I think I will, might be confusing it with another car, be good if it is 3 inch.

cheers

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Sun, 05 Jul 2015 3:44 +0000
by NZMarkb
They turned up on Friday and look good
They fit good but didn't have a chance to fit the lights as I was away for the weekend
I'll post a photo when I get them fitted up

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Thu, 30 Jul 2015 6:09 +0000
by martynvella
Mark,

You were right, I was confused, the SR5 bars here are 3 inch.

I decided not to go with the clamp idea cause the slot in the bracket didn't look wide enough for the UHF antenna base so had a bracket welded to the bar, just as I did for the roof rack and reverse lights mounted to the top of the bar.

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Thu, 30 Jul 2015 10:15 +0000
by NZMarkb
I didn't use the brackets in the end either
I made up some spacer blocks out of nylon and mounted my reverse lights under the bar
I ran the wires through the bar (what a prick of a job)
Image

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Thu, 30 Jul 2015 2:53 +0000
by rds_929
NZMarkb wrote:I didn't use the brackets in the end either
I made up some spacer blocks out of nylon and mounted my reverse lights under the bar
I ran the wires through the bar (what a prick of a job)
Image


where did u run the wires after the bars ?? through the tub or straight through the cabin ??

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Thu, 30 Jul 2015 4:28 +0000
by NZMarkb
I ran them down between the cab and tray then along the chaise rail up into the engine bay and then ran the switching wires through the fire wall grommet

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Thu, 30 Jul 2015 5:38 +0000
by rds_929
legend thanks mate how much light do they put enough of a flood for camping ??

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Fri, 31 Jul 2015 3:30 +0000
by NZMarkb
Yer mate their great for setting up camp or loading the dirt bikes on the trailer
I do get a bit of reflection off the hard lid (Turns the bush blue) but I can live with it
Good luck

Re: Mounting a LED lightbar to the SR5 sports bar

PostPosted: Fri, 31 Jul 2015 6:58 +0000
by rds_929
legend thanks man that's excatly what i wanted to hear will be getting heaps of refelction when i load my bike in the tub ha ha cant wait :D :D :D