sas

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: sas

Postby 3dhilux on Thu, 07 Oct 2010 7:09 +0000

scottsr20 wrote:Wow talk about six degrees of separation ! I gave an auto to your brother to take down to Sydney (from Brissie ) to my brother Shane - you know , the major pisshead with the 79 front axled lux (I did that ! ) , twin transfer cases and never drives . Must be about time I came down south and get some shit done on that thing so he can drive it when he gets back!

i was spouse to pick the auto up lucky i didn't there no way a would of been able to fit that in he told me it was small.
we told him where going to part it out while hes away. i dose need to get finish before he wreaks the 80
web wheeling since 2009
drunken engineering
http://www.facebook.com/pages/Drunken-e ... 9040101915
User avatar
3dhilux
 
Posts: 283
Joined: Tue, 24 Nov 2009 5:08 +0000


 

Re: sas

Postby A1 Mech on Tue, 21 Dec 2010 2:53 +0000

How is that laid back shackle angle now that the leafs have sagged in? Mine was setup as vertical then when the leafs dropped about 65mm after a few trips the shackle kicked back to a perfect angle.
A1 Mech
 
Posts: 10
Joined: Mon, 20 Dec 2010 2:03 +0000

Re: sas

Postby A1 Mech on Tue, 21 Dec 2010 2:56 +0000

3dhilux wrote:the chop begins tonight :twisted: .i wouldn't do a ifs eliminator kit the car ends up way to high my mate car is 8in higher then mine (same model) and i have 33's with 40mm lift and he has the 4in kit and 35's.


thats cause the 4" kits are way more then 4" of lift, the 3" leaf packs are more then enough for any aussie lux. They will give 7" of lift from new and sag down to a reasonable 4" or so. The description is a bit off.
A1 Mech
 
Posts: 10
Joined: Mon, 20 Dec 2010 2:03 +0000

Re: sas

Postby 3dhilux on Tue, 21 Dec 2010 3:30 +0000

the 4in kit is a genuine 4in now the shackles where to short chris sent the wrong ones all fixed now .hes only wheeled it once and now wants to do a 4 link rear
web wheeling since 2009
drunken engineering
http://www.facebook.com/pages/Drunken-e ... 9040101915
User avatar
3dhilux
 
Posts: 283
Joined: Tue, 24 Nov 2009 5:08 +0000

Re: sas

Postby A1 Mech on Tue, 21 Dec 2010 8:23 +0000

so use are using aussie made locktup leaf packs?

If they are a genuine 4" they must be alot lighter duty then the TG packs, my 3" TG packs are massive, I changed to 4" locktup rears to try and level it out but they ended up lower then the 3" TG packs.

4link would be good, nothing wrong with the flex the rear kit has tho, I have inverted 12" billys and they go to full droop easy with the weight of the 4runner.
A1 Mech
 
Posts: 10
Joined: Mon, 20 Dec 2010 2:03 +0000

Re: sas

Postby 3dhilux on Thu, 23 Dec 2010 2:16 +0000

yep there the aussie made leafs. my brother dosn't have the rear kit but 1 of my mates has the full front and rear kit in a ln106 and it works great just dont cut the retainers of u will end up with snaped spring as he found out :lol:
web wheeling since 2009
drunken engineering
http://www.facebook.com/pages/Drunken-e ... 9040101915
User avatar
3dhilux
 
Posts: 283
Joined: Tue, 24 Nov 2009 5:08 +0000

Previous

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 8 guests