Separating the V6 4L from the 5 Speed Auto
Posted: Sun, 31 Mar 2019 11:24 +0000
Hi,
I need to remove/separate the V6 4L motor from the 5 Speed Auto, is there anything I need to consider prior to the actual seperation and then reassembly later. I have heard there can be issues with the gearbox pump if this is done incorrectly.
I am ready to crack the engine mounts and the gearbox housing as the motor needs to come out for maintenance.
Too hard to get under the car to undo the sump nut...figure I could just lift the engine out and give it a shake to make sure all the old oil is out....
Thanks in advance.
Ackky.
I need to remove/separate the V6 4L motor from the 5 Speed Auto, is there anything I need to consider prior to the actual seperation and then reassembly later. I have heard there can be issues with the gearbox pump if this is done incorrectly.
I am ready to crack the engine mounts and the gearbox housing as the motor needs to come out for maintenance.
Too hard to get under the car to undo the sump nut...figure I could just lift the engine out and give it a shake to make sure all the old oil is out....
Thanks in advance.
Ackky.