Steering Knuckle Spindle LN106 Hilux

General discussion of basically anything related to the 1988 - 2005 Hilux

Steering Knuckle Spindle LN106 Hilux

Postby MrTwoCents on Thu, 05 Dec 2019 11:26 +0000

Hello,

Has anyone replaced their steering knuckle spindle before? I was just wondering what needs to be done when replacing the spindle. Like any other common parts to replace at the same time?

Thanks in advance.
MrTwoCents
 
Posts: 12
Joined: Wed, 20 Nov 2019 2:04 +0000
Location: QLD Australia


 

Re: Steering Knuckle Spindle LN106 Hilux

Postby Ozwaz on Thu, 05 Dec 2019 6:32 +0000

Mate, just go and buy a swivel hub kit, a set of wheel bearings, some grease and degreaser and your pretty good to go. Some locktight is handy. What happened to trash your spindle/stub axle?
Ozwaz
 
Posts: 115
Joined: Mon, 27 Jun 2016 8:17 +0000
Location: Rossville FNQ

Re: Steering Knuckle Spindle LN106 Hilux

Postby MrTwoCents on Fri, 06 Dec 2019 9:06 +0000

Ozwaz wrote:Mate, just go and buy a swivel hub kit, a set of wheel bearings, some grease and degreaser and your pretty good to go. Some locktight is handy. What happened to trash your spindle/stub axle?


A kit like this https://www.onlineautoparts.com.au/products/ZPN-01797 should do the trick right? I am not exactly sure I was doing my wheel bearings and I had a bit of a hard time getting the nut off and I stuffed the thread. Was my own stupidity I was doing it in the dark and got a bit too angry. I found a replacement one here https://www.onlineautoparts.com.au/products/ZPN-24766 but while I am at it I thought I should probably make sure there's nothing else I need to do at the same time. Thanks for the info.
MrTwoCents
 
Posts: 12
Joined: Wed, 20 Nov 2019 2:04 +0000
Location: QLD Australia


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 5 guests