TODDIE'S SASed & Linked Extra Cab

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: TODDIE'S Extra Cab

Postby Husky77 on Mon, 28 Mar 2011 4:30 +0000

Also, - Beast of a truck m8 - looks tuff as. And X2 - go the extra cabs!
User avatar
Husky77
Platinum Subscriber
 
Posts: 194
Joined: Sun, 27 Dec 2009 7:39 +0000
Location: Melbourne


 

Re: TODDIE'S Extra Cab

Postby toddie on Tue, 29 Mar 2011 12:47 +0000

madtam wrote:That new washer bottle fits there perfect, almost looks factory issue.. neat job m8 :)


new washer bottle?? :?

madtam wrote:Also, - Beast of a truck m8 - looks tuff as. And X2 - go the extra cabs!


thanks mate :D
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

Re: TODDIE'S (NEED HELP)

Postby toddie on Tue, 29 Mar 2011 12:48 +0000

toddie wrote:fella's i pulled the intercooler off on the weekend to suss out my problem with the oil in my tube running to my boost guage! there was a little bit of really watery oil sitting on the bottom?? not sure if this is ok or not??

i would of thought if my turbo had a crook seal it would be blowing blue smoke, and on its way out! but seems to fine??
can this be related to my cold rattle problem with the injectors??

opinions will be much appreciated

cheers

toddie
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

TODDIE'S Extra Cab

Postby KTM525EXC on Tue, 29 Mar 2011 1:28 +0000

toddie wrote:
toddie wrote:fella's i pulled the intercooler off on the weekend to suss out my problem with the oil in my tube running to my boost guage! there was a little bit of really watery oil sitting on the bottom?? not sure if this is ok or not??

i would of thought if my turbo had a crook seal it would be blowing blue smoke, and on its way out! but seems to fine??
can this be related to my cold rattle problem with the injectors??

opinions will be much appreciated

cheers

toddie


It sounds to me like the same problem we all have. The egr crap that puts burnt gas back into our manifold. Have a read of the cleaning egr thread that could be where your problem lies. Some members said there's were really oily carbon deposits others said there's were very dried up carbon.

Hope this helps.
I would put a link to the relevant thread but on the iPhone it makes it hard lol

Cheers Troy
D4D THE WAY TO BE!!!!!!
KTM if it's not orange, its a lemon
KTM's Kick Arse Buildup
User avatar
KTM525EXC
 
Posts: 6114
Joined: Thu, 17 Apr 2008 1:00 +0000
Location: ADELAIDE, SA

Re: TODDIE'S Extra Cab

Postby helmut79 on Tue, 29 Mar 2011 1:36 +0000

Mick
FCCW

“This is anger management......I’m channelling it into something and then I destroy it!”

My Build viewtopic.php?f=41&t=6869

New Member Sandpit viewforum.php?f=83
User avatar
helmut79
 
Posts: 6791
Joined: Sat, 31 Jul 2010 4:52 +0000
Location: Newcastle, NSW

TODDIE'S Extra Cab

Postby KTM525EXC on Tue, 29 Mar 2011 2:05 +0000

Cheers Mick ;)

Edit: I worked out how to copy and post links in tappatalk, it wasn't as hard as I thought :lol:
Last edited by KTM525EXC on Tue, 29 Mar 2011 3:45 +0000, edited 1 time in total.
D4D THE WAY TO BE!!!!!!
KTM if it's not orange, its a lemon
KTM's Kick Arse Buildup
User avatar
KTM525EXC
 
Posts: 6114
Joined: Thu, 17 Apr 2008 1:00 +0000
Location: ADELAIDE, SA

Re: TODDIE'S Extra Cab

Postby toddie on Tue, 29 Mar 2011 3:41 +0000

ohhh awsome :D cheers fellas ill have a look at that!
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

Re: TODDIE'S Extra Cab

Postby Husky77 on Wed, 30 Mar 2011 3:48 +0000

Yeah sorry m8 it was Mmaaxx's new washer bottle on page 1 on this thread, i thought it was yours! :oops:
User avatar
Husky77
Platinum Subscriber
 
Posts: 194
Joined: Sun, 27 Dec 2009 7:39 +0000
Location: Melbourne

Re: TODDIE'S Extra Cab

Postby toddie on Wed, 30 Mar 2011 4:43 +0000

madtam wrote:Yeah sorry m8 it was Mmaaxx's new washer bottle on page 1 on this thread, i thought it was yours! :oops:


ohh lol all good! i was confused for a min! :D
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

Re: TODDIE'S Extra Cab (ADVICE??)

Postby toddie on Tue, 12 Apr 2011 3:46 +0000

fella's im after a bit of advice if anyone can help??

i also have the shuttering changing into 4th gear, as a few other fellas have! spoken to a few blokes and theyve recomened to get a tailshaft spacer and c how that goes!
im looking at the superiour engineering options with the 25mm or the 40mm tailshaft spacer
not to sure on which one to go?? my ute is 4" front 2" rear
maybe 40mm spacer will be the go??

all options will be much appreciated??

cheers

toddie
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

Re: TODDIE'S Extra Cab

Postby GreenHilux Guy on Tue, 12 Apr 2011 4:06 +0000

Todd, skip the spacer and give Ron a call at Driveline Services. In Archerfield. He can do you a one piece rear tail shaft for a very good price. Some people have had luck with spacers, some haven't. I don't think they are a complete solution, just masking a bigger problem which can be sorted with something made for the job.

I'm off to see them soon for the same op once I sort out the taller leaves in the back.
User avatar
GreenHilux Guy
 
Posts: 875
Joined: Mon, 15 Oct 2007 1:00 +0000
Location: Mt Cotton, QLD

Re: TODDIE'S Extra Cab

Postby toddie on Tue, 12 Apr 2011 4:10 +0000

GreenHilux Guy wrote:Todd, skip the spacer and give Ron a call at Driveline Services. In Archerfield. He can do you a one piece rear tail shaft for a very good price. Some people have had luck with spacers, some haven't. I don't think they are a complete solution, just masking a bigger problem which can be sorted with something made for the job.

I'm off to see them soon for the same op once I sort out the taller leaves in the back.


ohh awsome, just down the road :D

if its not too much to ask have you got contact details??

cheers
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

Re: TODDIE'S Extra Cab

Postby Banger on Tue, 12 Apr 2011 4:21 +0000

toddie i had similar problem in my truck i tried a spacer did not fix the problem.
ended up putting 10mm spacers under my centre bearing and putting some leaf wedges in a cheaper option and i have not looked back. hope this helps
User avatar
Banger
 
Posts: 70
Joined: Sat, 06 Feb 2010 3:34 +0000

Re: TODDIE'S Extra Cab

Postby toddie on Tue, 12 Apr 2011 4:25 +0000

Banger wrote:toddie i had similar problem in my truck i tried a spacer did not fix the problem.
ended up putting 10mm spacers under my centre bearing and putting some leaf wedges in a cheaper option and i have not looked back. hope this helps


cheers banger!

it would of been good to get this problem sorted before my easter trip but ive prob left it a bit too late!
i think ill have a chat to drivline and go from there :D

Also some good news, after fighting with toyota for about 9 months im finally getting my injectors replaced under warrantly! bring back my power :twisted:
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

Re: TODDIE'S Extra Cab

Postby danmcccc on Tue, 12 Apr 2011 5:09 +0000

im agreeing with what the boys above have said...i work on cranes and trucks for a living and most vibration problems are usually put down to the uni joint...since your lifted to the heavens your uni angles would be crazy and putting a spacer in there will make it worse becuase it will make the distance between the 2 uni's shorter and therefore make the angles steeper...we use driveline services at work and they are pretty good man, they know their shit

goodluck
Dan
old enough to know better...young enough to not give a f**k

MY KILLER BUILD THREAD
viewtopic.php?t=9235
User avatar
danmcccc
 
Posts: 2522
Joined: Mon, 10 Jan 2011 5:16 +0000
Location: Brisbane, westside

Re: TODDIE'S Extra Cab

Postby toddie on Tue, 12 Apr 2011 5:18 +0000

danmcccc wrote:im agreeing with what the boys above have said...i work on cranes and trucks for a living and most vibration problems are usually put down to the uni joint...since your lifted to the heavens your uni angles would be crazy and putting a spacer in there will make it worse becuase it will make the distance between the 2 uni's shorter and therefore make the angles steeper...we use driveline services at work and they are pretty good man, they know their shit

goodluck
Dan


ohh makes sense :)

so is it doing any harm until im able to get it sorted??
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

Re: TODDIE'S Extra Cab

Postby danmcccc on Tue, 12 Apr 2011 5:23 +0000

well if its making noises that means theres movement somewhere...and if theres movement then theres excessive wear in one of the needle bearings...get under it and shake your tailshaft and see if theres any movement in the uni's if there is get right onto it...and grease the f**k out of it (i think theres grease nipples on the unis xP) you dnt want your tailshaft or centre bearing letting go man

cheers
Dan
old enough to know better...young enough to not give a f**k

MY KILLER BUILD THREAD
viewtopic.php?t=9235
User avatar
danmcccc
 
Posts: 2522
Joined: Mon, 10 Jan 2011 5:16 +0000
Location: Brisbane, westside

Re: TODDIE'S Extra Cab

Postby toddie on Tue, 12 Apr 2011 5:29 +0000

danmcccc wrote:well if its making noises that means theres movement somewhere...and if theres movement then theres excessive wear in one of the needle bearings...get under it and shake your tailshaft and see if theres any movement in the uni's if there is get right onto it...and grease the f**k out of it (i think theres grease nipples on the unis xP) you dnt want your tailshaft or centre bearing letting go man

cheers
Dan


mmm thats no good :cry:

got my easter trip coming up! spewing!!

thanks for that mate

toddie
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

Re: TODDIE'S Extra Cab

Postby danmcccc on Tue, 12 Apr 2011 5:51 +0000

just check it out man...if theres no movement anywhere in the shaft you'll probly get heaps more life outta it

cheers
dan
old enough to know better...young enough to not give a f**k

MY KILLER BUILD THREAD
viewtopic.php?t=9235
User avatar
danmcccc
 
Posts: 2522
Joined: Mon, 10 Jan 2011 5:16 +0000
Location: Brisbane, westside

Re: TODDIE'S Extra Cab

Postby toddie on Tue, 12 Apr 2011 5:56 +0000

thanks heaps man

and i see your an ippy boy :lol:

toddie
User avatar
toddie
 
Posts: 834
Joined: Wed, 06 Oct 2010 5:31 +0000
Location: brisbane

PreviousNext

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 42 guests