SHORTYZZ Build

[Shortyzz]

Hey guys ive been on here for a while and just thought id post up my build.

Bought the Car in Nov 09 and kept it stock till i paid it off, so now im slowly building it how i want it

How i bought it






Removed Factory Toyota Bull bar and replaced it with 09 Stock front bar
De-badged
Removed black strip down the side
Roll Bar
Tub Line with custom Eye bolts and high lift jack mount
75mm Front suspension spacer
Extended rear shackles
Bling Grill
2 Inch body lift
Dig Options Headunit with reverse Camera
285/75/16 MTZ
16 x 8 Steel wheels (should of gone 17's so i could upgrade to Prado brakes)
IPF 800XS Spotties on the roll var
Led Tray lights

Future Mods:

3 Inch exhaust and chip (still unsure of what brand)
Change the Front and Rear diff Ratio and lock them
Bilstein shocks with king springs
Custom Tube front Bar and sliders
Arb Air compressor

How she sits atm, thought i take some photos on the way home from work just tryin to find some mud






And one posser pic

[hilux xcab]

looks tough shortyzz

[joshmackay23]

hey shortyzz.. you lux is looking awesome! lovin those tyres.

good luck with the rest of the build

[Sr5luxy]

Those wheels are schmick, would they fit under a 2" lift kit?
Looking awesome mate.

[KTM525EXC]

Awsome looking rig shortyzz!!!!

how long did it take to install the BL? the stance is spot on

cheers Troy

[Shortyzz]

Just an update, ordered my 3 inch turbo back exhaust from Sterling so should arrive Friday hopefully, and hopefully am able to contact Cal Offroad today to organise a 3 inch lift, then pick up an ARB compressor later on the week and install it.

Finished off my wiring for my spotties and LED tub lights (the LED Lights are awesome such a clean white light), only thing having trouble with the IPF wiring kit and toyota's being negativley switched, should sort it out by the weekend, Now just to contact BUDs and see if we can organse a front tube bar and sliders

[Shortyzz]

Awsome looking rig shortyzz!!!!

how long did it take to install the BL? the stance is spot on

cheers Troy

I did the bodylift over two nights after work, first i lifted the tub about an hour tops, and then did the body the day after, hardest part was the Steering extension and trying to line it up, All up prob about 3 hours.

[Shortyzz]

Those wheels are schmick, would they fit under a 2" lift kit?
Looking awesome mate.

Maybe with a Body lift aswell, the kit from VMN is top notch, im running a 3inch lift and bodylift and the front still scrubs under full turning, still have to trim the inner gaurds and probably the body mount

[joshmackay23]

how much was the sterling 3in?

[Shortyzz]

how much was the sterling 3in?

$820 Deilevered, now just to replace the rear muffler with a straight pipe

[EASTCOAST]

Hi Shortyzz what offset rims have you got....... how bad do you scrub

[Shortyzz]

Hi Shortyzz what offset rims have you got....... how bad do you scrub

There 16x8 0 Offset, and only just scrub on full lock, but if you trim your inner gaurd and flare if will clear and maybe trim the body mount, i havent really worried about mine yet though, might trim them up tomorrow.

[Hilux_mk6]

Hi mate, lovin the look of your lux! I'm new to this site as i've just purchased a new 2010 3.0 lux double cab, however i've also purchased an OME suspension lift which runs at about 2.5" lift. I really want to put larger tyres with new rims on it but not really sure what i can put on without getting it to rub. Ideally i'd lile to throw on some 285/75/16's but i dunno if thats a bit much? I've got a MK2 87 lux runnin massive tyres and a 6" lift so i can get pretty much any damn trye i want on that, but i'm a complete novice with the new ones. Any advice?
im changing the rear leafs shocks and front shocks n coils, also got a Arb front bumper waiting to go on too...

any advice from you guys would be much appreciated!

Sunny