Cambo's Shagga

[CamboT]

Hope this works...

Specs and a few pics for my Shagga Hilux build

Specs: 2007 d/cab SR 5spd 3.0td
Maxxis Razr MT772 265/70R17 tyres on 2018 Hilux 17x7.5" Steel rims
MCC winch bar
Outback Armour 2-3"suspension
Adventure Kings 9" Domi8rX spotlights and work lights for reversing.
Snorkel unknown brand was on it when I purchased the truck
Std so far apart from those few things. Got a few things I want to do to it though. Good things take time so will take a while haha

20190723_083800 by Cameron Taylor, on Flickr

20190912_083526 by Cameron Taylor, on Flickr

20191026_143728 by Cameron Taylor, on Flickr

received_505985363538556 by Cameron Taylor, on Flickr

received_544520113056801 by Cameron Taylor, on Flickr

received_1459209694243714 by Cameron Taylor, on Flickr

20191026_085200 by Cameron Taylor, on Flickr

20191026_090258 by Cameron Taylor, on Flickr

[Caleebra]

Welcome! Nice looking Hilux youve got there!
I like how you mounted your backup lights, nice work!

[NZMarkb]

Nice bar mate, that's what I had on mine
They do a good rear bar also

[Stucknotstopped]

I like the wheels, do they stay inside the wheel arches without flares. Also what is the offset on those rims.

[CamboT]

I like the wheels, do they stay inside the wheel arches without flares. Also what is the offset on those rims.

The wheels are factory Hilux 2015-current GUN SR steelies. +30 offset. 17x7.5"
With the 265/65 AT's the tyres are just on the edge of the fenders/guards.
With the 265/70 MT's the tyres just protrude past and need flares....which I must get round to fitting 1 day lol

[hiluxxury]

Nice rig Cambo. Is it a euro3 model?

[CamboT]

Nice rig Cambo. Is it a euro3 model?

It's a NZ new spec KUN26 with the 1KD-FTV engine

[CamboT]

A few pics as I go along doing more to the old girl....

https://flic.kr/s/aHsmKNrU7J

[CamboT]

Spray on deck liner
Used Roberlo Robliner

https://flic.kr/p/2kic9Vd

https://flic.kr/p/2kic9UG

https://flic.kr/p/2kigqXz

[CamboT]

Few more things done...

3" DEA exhaust system.
New injectors - genuine Denso.
Prado 2020+ GD 150 front brakes - Massive difference!!

Finally got round to getting the ECU reflashed. Local specialist to me did it and its made a HUGE difference.
I specifically asked not for a rolling coal power tune but rather a safe tune that deletes EGR and would help performance for towing and offroad. They were surprised as everyone wants the big numbers and heaps of smoke.
Tune is a mild stage 2 that copes with the mods I've done without overpowering the running gear which can be the weakest link.

[hiluxxury]

Few more things done...

3" DEA exhaust system.
New injectors - genuine Denso.
Prado 2020+ GD 150 front brakes - Massive difference!!

Finally got round to getting the ECU reflashed. Local specialist to me did it and its made a HUGE difference.
I specifically asked not for a rolling coal power tune but rather a safe tune that deletes EGR and would help performance for towing and offroad. They were surprised as everyone wants the big numbers and heaps of smoke.
Tune is a mild stage 2 that copes with the mods I've done without overpowering the running gear which can be the weakest link.

Nice. Did you need to change the brake cylinder?

[CamboT]

Few more things done...

3" DEA exhaust system.
New injectors - genuine Denso.
Prado 2020+ GD 150 front brakes - Massive difference!!

Finally got round to getting the ECU reflashed. Local specialist to me did it and its made a HUGE difference.
I specifically asked not for a rolling coal power tune but rather a safe tune that deletes EGR and would help performance for towing and offroad. They were surprised as everyone wants the big numbers and heaps of smoke.
Tune is a mild stage 2 that copes with the mods I've done without overpowering the running gear which can be the weakest link.

Nice. Did you need to change the brake cylinder?

Nope, no need to change the master cylinder.

[hiluxxury]

Awesome, thanks

[CamboT]

Few pics of the Brake upgrade.....

https://flic.kr/p/2orTgsQ

https://flic.kr/p/2phMB7X

https://flic.kr/p/2phS5mx

https://flic.kr/p/2orR1kc

https://flic.kr/p/2orSgay

https://flic.kr/p/2orTgnu

https://flic.kr/p/2orSg72

https://flic.kr/p/2orT2pg

Didn't have to change master cylinder.
Only mod needed was to bend the backing plates slightly to not rub on the new larger Prado rotors.
I also replaced the caliper hard pigtail brake line as mine didn't fit the new calipers very well. They sealed, but had to be screwed in till the hex was hard on the caliper. Didnt like that so put longer brake pipe fittings on the pigtails and reflared the pipes.

https://flic.kr/p/2phTHT7

These brakes are so much better and bigger, but you do need to run on 17" wheels.
Highly recommend this "bolt on" mod for the Hilux.

[hiluxxury]

Thanks for the update