TRS build

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: TRS build

Postby Tyler1993 on Wed, 29 Aug 2018 3:53 +0000

NZMarkb wrote:You can find the same thing on Aliexpress for about $15
https://www.aliexpress.com/item/1x-Fuse ... autifyAB=0


Hey Mark, I’ve never used aliexpress before! Didn’t even knew it existed! Do you use it much?


Sent from my iPhone using Tapatalk
User avatar
Tyler1993
 
Posts: 296
Joined: Thu, 16 Feb 2017 7:33 +0000
Location: Cairns, QLD


 

Re: TRS build

Postby NZMarkb on Thu, 30 Aug 2018 2:40 +0000

Yes all the time
Great source of LED strip lights too
The seller doesn't get paid until you confirm the goods have arrived
I always look for free shipping
If your not prepared to stand behind our Troops
Then try standing in front of them
User avatar
NZMarkb
Platinum Subscriber
 
Posts: 702
Joined: Thu, 18 Jul 2013 3:48 +0000
Location: Auckland NZ

Re: TRS build

Postby Critter350 on Sat, 01 Sep 2018 1:25 +0000

Cheers Tyler. Any idea why one of the relay sockets is different? Or is this a flasher unit? Seems to have 4 // blades whereas as most relays have one that runs perpendicular. Reckon it can be changed or modified for a normal relay?
Also is there a bus in it? Or is it all wired?


Sent from my iPhone using Tapatalk
Critter350
 
Posts: 521
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: TRS build

Postby scottellis88 on Thu, 20 Sep 2018 8:59 +0000

That’s my biggest hate with the fuse holders, why dont they offer bus links to common up one side and keep it insulated.
User avatar
scottellis88
 
Posts: 162
Joined: Mon, 22 Sep 2014 5:51 +0000
Location: Mount Cotton, QLD

Re: TRS build

Postby Critter350 on Fri, 21 Sep 2018 8:21 +0000

scottellis88 wrote:That’s my biggest hate with the fuse holders, why dont they offer bus links to common up one side and keep it insulated.

Bussmann does single and double bussed versions, just a bit expensive. https://www.baintech.com.au/business-ne ... wer-module


Sent from my iPhone using Tapatalk
Critter350
 
Posts: 521
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: TRS build

Postby Cameron12 on Mon, 26 Nov 2018 7:37 +0000

Tyler1993 wrote:So today I completely blocked off the EGR and install the manual mapper. Very very easy to install. Took it for a drive this arvo and there is a noticeable difference down low between the full plate and the plate with a hole.
And the best part, no codes!!
I haven’t played with the fuel trim yet but I will in good time.

Image
I also bypassed the egr cooler to stop the coolant flowing through it.
ImageImage
Before the manual mapper, egr bypass and intercooler. My coolant temps were between 86-90 on general driving and have seen it upto 95 they are now 80-85
Highest I have seen today was 87 and I was giving it a boot full.
It now drops back down to 80-82 very quickly as soon as you back off.

What temp is everyone else’s Luxys running at?


Sent from my iPhone using Tapatalk


Hey man, have you turned the EGR off on the ECU too?
If yes, what was involved in doing so?
Is there software you need to download or anything?

Cheers, Cam
Cameron12
 
Posts: 72
Joined: Sun, 11 Sep 2016 3:41 +0000
Location: Bulls, NZ

Previous

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 41 guests