Page 3 of 5

Re: Critter350

PostPosted: Tue, 21 Nov 2017 4:43 +0000
by TOYZX
Mint!

Sent from my SM-G955F using Tapatalk

Re: Critter350

PostPosted: Tue, 21 Nov 2017 6:18 +0000
by Tyler1993
Yeah crit that smaller horizontal section on the switch plate is for an aux input.
Here's mine

Image



Sent from my iPhone using Tapatalk

Re: Critter350

PostPosted: Tue, 21 Nov 2017 8:21 +0000
by Critter350
As in aux to the head unit? Seems a bit weird.


Cheers
Crit

Re: Critter350

PostPosted: Tue, 21 Nov 2017 11:51 +0000
by lerroy
Critter350 wrote:Minor install over the weekend, ally frame inside the canopy so I don’t have to put holes in the fibreglass. Image
Plan is for hammock netting at the top to hold a couple of towels, sand board and gold pans. Then mozzie net hanging underneath coz we like sleeping with the windows wide open.
Rail under the front window is to strap dive tanks.


Cheers
Crit



Hey mate did you make this yourself?

Looks great, anymore photos?

Re: Critter350

PostPosted: Wed, 22 Nov 2017 7:45 +0000
by Critter350
Got it fabbed by a mate then installed it. Don’t have any other pics atm, what do you want to see specifically? The mounts?


Cheers
Crit

Re: Critter350

PostPosted: Wed, 22 Nov 2017 8:11 +0000
by trd2000
Critter350 wrote:Surprised the bottom passenger side switch cutout is smaller than the rest, is that normal?


thats not a switch hole, it's the USB/Aux Audio..... i havent measured but it's probably normal.

Re: Critter350

PostPosted: Wed, 22 Nov 2017 11:24 +0000
by lerroy
Critter350 wrote:Got it fabbed by a mate then installed it. Don’t have any other pics atm, what do you want to see specifically? The mounts?


Cheers
Crit


cool nice work, yeah does it just mount to the tray mount points ?

All good re pics, can work it out from the image cheers mate

Critter350

PostPosted: Wed, 22 Nov 2017 8:20 +0000
by Critter350
The devil in the detail. Flatbar hoop welded to flatbar mount secured by canopy bolt. Plan on replacing these with eye bolts as tie downs Image

Tube running front to back, bolted through slotted tongue. Image

Crossbar under window has welded plate for bolting. Image the bolt is not as close to the ‘glass as it looks, the frame only touches the canopy at mounts. There’s some sideways flex but not much front to back. Compression foam, like pool noodle, in the corners will sort it out.


Cheers
Crit

Re: Critter350

PostPosted: Sun, 26 Nov 2017 7:25 +0000
by Critter350
This $22 trailer net from Bunnings Imagefit perfectly Image


Cheers
Crit

Re: Critter350

PostPosted: Wed, 29 Nov 2017 8:51 +0000
by Critter350
Took the dremel to the old switch plateImageand fixed that undersize lower left switch spot Image fixed with a liberal amount of gorilla epoxy Image
Looks a bit rough in the pic, but doubt I’ll see it I situ. If I bog and paint, it will just be for the exercise.


Cheers
Crit

Re: Critter350

PostPosted: Mon, 04 Dec 2017 8:01 +0000
by Critter350
Finished panel fitted up with goodies from Air On Board. Image The switches look and feel great. Needed all the slots so I’ve gone with the round USB charger in the second accessory plug socket.
The Aux power is for a ‘switched accessories’ bypass, so for example I can leave something charging while off for lunch.
I’ve got fog lights in the bullbar, but none of those other lights yet! Oh well it looks the part.


Cheers
Crit

Re: Critter350

PostPosted: Mon, 04 Dec 2017 9:01 +0000
by lerroy
Looks awesome Crit. What's that ethernet looking port for?

Re: Critter350

PostPosted: Mon, 04 Dec 2017 9:15 +0000
by Critter350
For the uhf. The XRS has a hideaway base unit, hand piece plugs in here or I can unplug and put in the glovebox.


Cheers
Crit

Re: Critter350

PostPosted: Mon, 04 Dec 2017 9:48 +0000
by lerroy
Ah makes sense very clean

Re: Critter350

PostPosted: Sat, 23 Dec 2017 1:22 +0000
by Critter350
Got around to installing the Utemart flares today. Bit fiddley but not too bad. They are +10mm bigger than SR5, I think it’s about right to blend with the bullbar. ImageImage


Cheers
Crit

Re: Critter350

PostPosted: Sat, 23 Dec 2017 2:35 +0000
by Tyler1993
Looking shmicko crit [emoji1362]


Sent from my iPhone using Tapatalk

Critter350

PostPosted: Mon, 08 Jan 2018 7:44 +0000
by Critter350
Wired up all the new switches and led spotties this weekend. 4 on the RHS of the steering column, 6 in front of the gear stick made for a pretty heavy loom.
Inline diodes for the two switches with high beam:ImageImagetaped it all up after this to keep it a bit neater. ImageImage
Each switch has two led’s, one wired to dash lights the other to show when it is on.
I’ve used 7 core trailer wire out through the fire wall, to run as triggers from the switches to relays. The LED spotties are the only thing wired up at the moment, but I don’t need to get behind the dash again for the rest. Image
I’ve got 4 of these to go onImage thinking one on each of the bullbar wings at 45’ and another each side between the cab and canopy, for spotting camp sites along tracks.


Sent from my iPhone using Tapatalk

Re: Critter350

PostPosted: Mon, 08 Jan 2018 8:38 +0000
by Gipsy
Should be able to light the campfire at 200 metres :lol:

Re: Critter350

PostPosted: Mon, 08 Jan 2018 8:48 +0000
by lerroy
Nice work Crit

lots of light, super clean switches as well.

Re: Critter350

PostPosted: Mon, 08 Jan 2018 1:04 +0000
by TOYZX
Nice work Crit!

Sent from my SM-G955F using Tapatalk