Critter350

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Critter350

Postby Critter350 on Fri, 26 May 2017 9:47 +0000

Why a 2007 SR Extracab?
I've been a fan of the hilux since my farming days, driven a few but never owned one. Used (and abused) all sorts of Utes but the Toyota's were the only ones that seemed to hold up. Cruisers were big and tough, but heavy and not as agile as the lux. And the bigger trucks keep the tracks trimmed wide enough for the hilux get down mostly unscathed.
I wanted a tray long enough to sleep on, as well as room behind the seat, so extra cab was the answer.
Diesel for towing, manual cos I just like em. And I've boiled an auto on the beach once.
Planning on pillar pod so pre 2012.
I was patient, watched the market and forums for 6 months, was very happy to find this at the right price.
Image

10 years old, 200k's, ex Alinta, never seen a dirty road let alone a dirt road. Had it's 200k service 2k's prior, 18 months ago, so it's been shed' for a while. New battery with the deal. Not a mark on the bash plates or on ally steps. All stock except for the flexiglass canopy and tray.
Image

Preston beach for the christening.
ImageImageImage


Adding the future / wish list here: (keeping it legal in the Western 'nanny' state)

•Fronts struts to carry the barwork, ~30mm lift, probably adjustables to counter the inevitable settling in sag
•31/10.5/15 or 265/70/16, probably go the 16's because they have more offset options in sunnies
•Black 8" sunnies, p10 or p20
•carjoying head unit with the 7450 chip swap, all plumbed up and decent speakers
•GME TX3345
•Bash plates
•Recovery points
•fuel pre filter
•cruise control
•mfc steering wheel
•Pillar pod
•Under tray boxes and drawer
•Water tank
•Fishing rod holder
•long range tank
•Fyrlyt or HTX230 driving lights
• side led search lights
Last edited by Critter350 on Fri, 21 Jul 2017 11:21 +0000, edited 1 time in total.
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA


 

Re: Critter350

Postby Critter350 on Fri, 26 May 2017 10:05 +0000

Time to make it mine. Got a great deal from OCAM on snorkel, bullbar, scrub bars, steps, 17k winch w synthetic rope, bonnet protector and weather strips.
Image
Snorkel first - thanks to DB's detailed guide. [emoji106]
Image


Winch and bullbar.
Image
Image
Steps and scrub bars
Image
Happy with all this, but don't like the way the bonnet protector sits so won't fit it. Undecided on the weather shields.

Interior protection, really love the black duck denims, dash mat and sand grabber floor mats.
Image



Sent from my iPhone using Tapatalk
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Critter350

Postby Critter350 on Fri, 26 May 2017 10:12 +0000

Wasn't too impressed with the wiring for the bullbar lights but I'm in this for the process as much as the result. ImageImage
Image

Bullbar came with some trim plates underneath that didn't fit so well, and leaves the radiator a bit exposed.
Image
But that's no big deal because I plan on getting a bash plate made up that will replace it.

Then it was time to let someone else work on her, down to my local ARB rep for twin lockers.
ImageImage
Last edited by Critter350 on Sat, 27 May 2017 8:44 +0000, edited 3 times in total.
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby TOYZX on Fri, 26 May 2017 10:17 +0000

Nice clean slate man! Good vintage too[WINKING FACE]. Shoulda got yaself some new headlights while the front end was apart, they look pretty yellow and faded! Whats next!

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Critter350

Postby Critter350 on Fri, 26 May 2017 10:29 +0000

Collecting bits for manifold clean, have got egr plate, crow foot spanner, ordered HPD can, still need a set of gaskets. Have also ordered a vxdiag nano w techstream, will see how the injectors are before I pull it apart.
Still got a long list, the more I read this forum the longer it gets.


Sent from my iPhone using Tapatalk
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby Critter350 on Fri, 26 May 2017 10:44 +0000

Didn't notice the lights until you mentioned it[emoji15]. I'd done about 300km when I pulled it apart, and none at night. The lights are pretty shocking, will start with brighter globes and get some driving lights by the by. They're on the list...


Sent from my iPhone using Tapatalk
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby TOYZX on Sat, 27 May 2017 5:19 +0000

Lol sorry man! Just a prick of a job once the bar work goes on. Mite have to head to supercheap and get a restoration kit instead.

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Critter350

Postby Critter350 on Sun, 28 May 2017 5:38 +0000

Let there be light.
Image
Made a huge difference, definitely recommended.
Stayed away from the blue headlight bulbs. You're welcome, oncoming traffic.


Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Critter350

Postby Critter350 on Tue, 06 Jun 2017 6:26 +0000

Beautiful piece of machining this bit of kit. Wasn't going to install it until I'd done the EGR clean but couldn't help myself.
Ended up pulling the intercooler off to attach the hose to the rocker cover, very tight fit. Used the Mrs hair dryer and plenty of elbow grease. Now I've had a look under there, I'm more confident to do the manifold and all.
Image
Image
Image


Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby Critter350 on Wed, 12 Jul 2017 6:21 +0000

EGR and manifold clean over the weekend, well worth doing.
ImageImageImage Image
Haven't had it out for a run yet, but happy (and relieved) it started after about 10 seconds of cranking.


Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby TOYZX on Wed, 12 Jul 2017 2:37 +0000

Good work!

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Critter350

Postby Critter350 on Fri, 28 Jul 2017 3:19 +0000

Thinking out loud about wheel options, keeping it legal without engineering approval.
TRD wasn't out in 2007 so have a 31" limit:
31x10.5x15
265/70R16
265/65r17
All about the same overall size and should fit without rubbing with 1" lift limitation.
Smaller rim = bigger sidewall, better floatation, less likely to dent a rim.
Bigger rim = less sidewall to stake, better high speed stability on road. More expensive rubber.
Need 7-9" rim for that size tyre. Wider rim, more chance of denting, less chance of pinching sidewall?
Offset. Limited to 50mm wider than standard track, but I can base it off SR5's 30mm rather than SR's 45mm. So max is +5.
Sunny's look fine and are half the price of the next cheapest wheel.

Image

Tyres- 265/70 16 in a decent all terrain, not too many options give an S speed rating, seems KO2 is the best option.


Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby Critter350 on Mon, 07 Aug 2017 7:11 +0000

Few bits over the weekend.

Inverted tow bar mod:
Image

Fishing rod holder:
Image

And ran a permanent active to the light in the canopy. It already had a light there, but was powered off the tail lights so had to leave the parkers on if I wanted to use it.


Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby Pommy on Mon, 07 Aug 2017 6:58 +0000

Hey Crit, got anymore pics of the inverted tow bar mod? Looking at this one myself, keen to see how it turned out/ any info.
Cheers pommy.
Pommy
 
Posts: 62
Joined: Wed, 18 Dec 2013 10:15 +0000

Critter350

Postby Critter350 on Mon, 07 Aug 2017 8:09 +0000

Above is the 'after' shot.
Before looks like this:
Image
Image

Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby Critter350 on Mon, 07 Aug 2017 8:16 +0000

In one of those pics above you can see my recovery boards, in the under tray rack. 4x tread pros and a shovel, with a pad locked gate.


Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby Pommy on Tue, 08 Aug 2017 6:50 +0000

Cheers for that mate. So how does it go now that the safety chain points are at the top?
Pommy
 
Posts: 62
Joined: Wed, 18 Dec 2013 10:15 +0000

Re: Critter350

Postby Critter350 on Wed, 09 Aug 2017 7:13 +0000

No worries with my boat, chains are plenty long enough.


Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby Critter350 on Sat, 12 Aug 2017 3:28 +0000

For all my careful planning on wheels, I just grabbed a bargain off FB. They'll do for 12 months. ImageImage
Brand new 31x10.5 cheapo muddies.


Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Critter350

Postby Critter350 on Sat, 26 Aug 2017 11:32 +0000

Decided to change the head unit for something a) actually works and b) has navigation. Got a bit carried away and ended up with this (but still no head unit!)Image


Cheers
Crit
Critter350
 
Posts: 524
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Next

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 3 guests