Page 7 of 10

Re: Arnes 2010 Lux

PostPosted: Fri, 02 Feb 2018 8:59 +0000
by Sam Gribley
I had a tonneau but once I take off the "sports bar" and add the racks for the tent, I'll have holes in it where I don't want them and no holes where I need them. So the old tonneau is useless anyway, might as well look at other options.

Re: Arnes 2010 Lux

PostPosted: Mon, 19 Feb 2018 3:17 +0000
by Caleebra
Sold my roofrack this weekend, and already ordered a new one!
Stoked!
Image
Image
Will have to drill holes in the roof for this one! :O

Regarding drilling holes in the roof of the Hilux,
I remember seeing somewhere on the forum that there are pre-drilled holes in the rain-gutter of these trucks? Or am i wrong...? Cant seem to find that thread i saw...



Sent from my iPhone using Tapatalk

Re: Arnes 2010 Lux

PostPosted: Mon, 19 Feb 2018 9:10 +0000
by TOYZX
That rack looks sweet. I've never seen any holes in a lux roof. Had to drill holes for all the ones I've fitted.

Sent from my SM-G955F using Tapatalk

Re: Arnes 2010 Lux

PostPosted: Mon, 19 Feb 2018 1:36 +0000
by Cameron12
What brand are they Arne?

Re: Arnes 2010 Lux

PostPosted: Mon, 19 Feb 2018 5:52 +0000
by Caleebra
TOYZX wrote:That rack looks sweet. I've never seen any holes in a lux roof. Had to drill holes for all the ones I've fitted.

Sent from my SM-G955F using Tapatalk


Thanks for the info, Luke :)

Cameron12 wrote:What brand are they Arne?


The brand is called Getodin.eu, a small company in poland that makes these. Chatted with a guy called Piotr.
Talked about the possibilites to do some changes for me. "No problem" he said!
So i’ve got a special one ordered in!

Keep watch for a new update soon! ;)



Sent from my iPhone using Tapatalk

Re: Arnes 2010 Lux

PostPosted: Wed, 21 Feb 2018 7:56 +0000
by Sam Gribley
Nice low profile roof rack.

How did you go with the tub rack? I had a mate help weld mine up a few days ago. Just have to finish spraying it, then remount it and put the tent on when it turns up. I think I got it at just the right height so that the highest part of the tent cover will sit at or below the roof line, will know when the tent goes on haha.

The tonneau is still off for now. Not sure what I'll end up doing there, still deciding.

Re: Arnes 2010 Lux

PostPosted: Fri, 23 Feb 2018 4:17 +0000
by Caleebra
Sam Gribley wrote:Nice low profile roof rack.

How did you go with the tub rack? I had a mate help weld mine up a few days ago. Just have to finish spraying it, then remount it and put the tent on when it turns up. I think I got it at just the right height so that the highest part of the tent cover will sit at or below the roof line, will know when the tent goes on haha.

The tonneau is still off for now. Not sure what I'll end up doing there, still deciding.


Isn't done yet, my welder friend has been busy at work the past weeks, but said he hopefully would get time next week to get them done, fingers crossed!

Post a picture mate and let us see it! :D

Re: Arnes 2010 Lux

PostPosted: Tue, 27 Feb 2018 9:47 +0000
by Sam Gribley
I don't like the system for attaching to the rack so I'll probably weld a little addition onto the rack so the tent can bolt straight through it. The rack is just fixed with tech screws for now. Once I've done the spray on tub liner I'll drill and bolt it. First attempt at posting photos so I used tapatalk, here goes...


ImageImage


Sent from my iPhone using Tapatalk

Re: Arnes 2010 Lux

PostPosted: Tue, 27 Feb 2018 3:51 +0000
by Caleebra
Sam Gribley wrote:I don't like the system for attaching to the rack so I'll probably weld a little addition onto the rack so the tent can bolt straight through it. The rack is just fixed with tech screws for now. Once I've done the spray on tub liner I'll drill and bolt it. First attempt at posting photos so I used tapatalk, here goes...

Sent from my iPhone using Tapatalk



Looks great mate!

Curious to know what did the hight of the rack measure?
And also the total hight from the bed top to the top of the roof tent?

Just use taptalk mate, much easier to post pics!
:mrgreen:

Re: Arnes 2010 Lux

PostPosted: Mon, 05 Mar 2018 7:07 +0000
by Sam Gribley
Yeah that was with tapatalk but the pics are still massive sorry.

To be honest we did it all by guesstamations and there wasn't a lot of measuring going on. I just got one to a size and angle I liked and then cut the other 4 posts to match. Then tacked them on two at a time and drew a line where the cross bar met with it. Hahaha very rough way of doing it but it worked perfectly.

I was aiming for 200mm from top of tub to top of the cross bar and ended up being over that, around 240mm from memory.

Not sure what you mean about the second measurement? Do you mean the top of the mattress to the top of the inside of the tent when it's set up? Or do you mean from the inside of the tub to the top of the tent, while packed up?

Re: Arnes 2010 Lux

PostPosted: Mon, 05 Mar 2018 8:13 +0000
by Caleebra
240mm seems to be a good hight.

My second question was; the hight from the top of the tub to the top of the tent when its closed :)


Sent from my iPhone using Tapatalk

Re: Arnes 2010 Lux

PostPosted: Tue, 06 Mar 2018 3:45 +0000
by Sam Gribley
Just went and checked it all now:

205mm from top of tub to top of bars
475mm from top of tub to top of tent while packed up with cover on (just below top of cab)
570mm from top of tub to top of ladder while packer up with cover on (just above top of cab)

Re: Arnes 2010 Lux

PostPosted: Tue, 06 Mar 2018 4:41 +0000
by Caleebra
Sam Gribley wrote:Just went and checked it all now:

205mm from top of tub to top of bars
475mm from top of tub to top of tent while packed up with cover on (just below top of cab)
570mm from top of tub to top of ladder while packer up with cover on (just above top of cab)



Thanks Sam, great info! :)

Re: Arnes 2010 Lux

PostPosted: Sun, 11 Mar 2018 5:20 +0000
by Caleebra
A smal update of the bedrack:

My welder friend sent pictures on friday to me, hopefully they will be ready on monday/ tuesday :D

Image
Image


Sent from my iPhone using Tapatalk

Arnes 2010 Lux

PostPosted: Tue, 13 Mar 2018 2:10 +0000
by Caleebra
A smal update from last night

Image

Will scuff them down a little and paint then matteblack.
Have also ordered Thule squarebars, two on 150cm and two on 135cm.
They will be arriving on wednesday hopefully.
Cant wait to get the RTT on the truck!

The roofrack should be ariving soon also [emoji1]


Sent from my iPhone using Tapatalk

Re: Arnes 2010 Lux - Now with RTT!

PostPosted: Fri, 16 Mar 2018 2:30 +0000
by Caleebra
Its finished!!!!

Image
Image
Image

It got a little to dark for good pictures when I got done, will post new pictures tomorrow if the weather holds up :)



Sent from my iPhone using Tapatalk

Re: Arnes 2010 Lux - Now with RTT!

PostPosted: Fri, 16 Mar 2018 3:34 +0000
by TOYZX
Mint!

Sent from my SM-G955F using Tapatalk

Re: Arnes 2010 Lux - Now with RTT!

PostPosted: Fri, 16 Mar 2018 4:05 +0000
by Caleebra
TOYZX wrote:Mint!

Sent from my SM-G955F using Tapatalk



Thx Luke :D


Sent from my iPhone using Tapatalk

Re: Arnes 2010 Lux - Now with RTT!

PostPosted: Fri, 16 Mar 2018 7:18 +0000
by NZMarkb
Nice work mate
Looks great

Re: Arnes 2010 Lux - Now with RTT!

PostPosted: Fri, 16 Mar 2018 5:09 +0000
by Caleebra
NZMarkb wrote:Nice work mate
Looks great



Thanks Mark :)