Sam Gribley wrote:Cool, that's a different way of doing it than anything I had thought of. Looks super strong.
What tent have you ordered? Looks like it will sit a little above your cab but I guess that's all part of your plan if you're adding a roof rack. Your set up will give you a shit load more storage than mine does haha. Still really unsure about what to do as far as organisation in the tub.
Sam Gribley wrote:Being in Norway, do you plan to add any sort of insulation to the base of the tent?
I'm thinking of adding a layer under the mattress, I have already found that a bit of condensation builds up between the mattress and the base it's laying on, which leads to a slightly damp bottom side of the mattress which could eventually get mouldy and ruin the mattress. It also gets pretty bloody cold down here too so preventing a bit of heat loss would be nice.
Something like this, cut to cover the whole topside of the base: https://www.ebay.com.au/itm/Heat-Insula ... 0677.m4598
TOYZX wrote:Nice work man!
Sent from my SM-G955F using Tapatalk
J-Lux2014 wrote:Looks awesome Arne.
Does it make much noise when you're driving?
Blackstream wrote:I use CTEK Battery sense, not a "health" monitor but tells you %-battery, voltage and temp. I also use a OBD2-reader that log/present whatever I want via bluetooth to phone.
Caleebra wrote:Blackstream wrote:I use CTEK Battery sense, not a "health" monitor but tells you %-battery, voltage and temp. I also use a OBD2-reader that log/present whatever I want via bluetooth to phone.
What OBD2 reader are you using?
Ive been looking on CTEK sense, looks like an OK product, how does it work with a dual battery setup?
Blackstream wrote:Caleebra wrote:Blackstream wrote:I use CTEK Battery sense, not a "health" monitor but tells you %-battery, voltage and temp. I also use a OBD2-reader that log/present whatever I want via bluetooth to phone.
What OBD2 reader are you using?
Ive been looking on CTEK sense, looks like an OK product, how does it work with a dual battery setup?
The OBD2-reader is a ELM 327 and I'm using the android Torque app.
Battery sense works fine. I Only have one on the aux battery. I don't see it neccessary to see the starter battery-%. Dual setup don't affect it I guess.
I was able to get hold of a ELM 327 Bluetooth off ebay, but sadly it didn't work with my iPhone...
Blackstream wrote:I was able to get hold of a ELM 327 Bluetooth off ebay, but sadly it didn't work with my iPhone...
Yes, there is an Android and a Iphone modell of the ELM 327, learning the hard way is also learning...
Users browsing this forum: No registered users and 30 guests