S.J's Dual cab work,play build , tray,canopy

[sjwortho]

hey guys .
thought i would start a build thread as im going to be getting my ute ready for some work and play .
i got the ute a week ago with 175,000km
so far its running great and hope it stays that way .
so lets get to it .





Its a 2006 sr5 auto diesel .

Mods done when i purchased .

-dual battery
-sports bar
-bar light
-long range fuel tank
-reverse camera - runs on its own screen . need to sort this out as the screen is in a bad place
-water rank under tray
-Arb rear step /tow
-electronic brakes system
-Fog lights
-Hid spotlights - getting rid of these

What i will be doing Asap

Bullbar - looking at a ironman
- removing the tub
-steel tray with trundle
-lockable mesh cage over the top of the tray with roof racks
-canvas over the mesh with fly screen sides
-custom brush-bars and sliders
-Roof tray with inbuilt Bar light holder
-snorkel
-New head unit for stereo - i love music so any tips in this area would be amazing
-2inch lift to help level out after tray and bar mods



future mods
-stereo upgrade
-canvas seat covers


i am a carpenter so im going to have to get other people to do this stuff . but i will be trying to do a fair bit of it myself .
i love learning so this is the place to be .
im in the Sutherland shire so any advice around here would be amazing .

thanks for looking and i cant wait to get started

[sjwortho]

so i have booked the hilux in for a ironman front bullbar .

also with a 12,500 pound winch .

i chose this one . .



i know its not arb but for the price of it and what they are doing for the lights and so on i really like the bar .

also had led parking lights and blinkers on there .

i know its all personal pref . .

also organised a nice 2" lift for the car once all the works are done . .


also underway is a steel tray

[TOYZX]

Nice rig mate. Just keep an eye on that bar mate! Make sure it's been fitted properly and stays nice and tight, especially if ya gunna be winching with it! Seen a lot of damage to chassis from them bars! What lift r ya goin for?

[sjwortho]

hey toyzx . .

looks like im going to go for the ironman foam cell lift .

its 2" but the guys at the shop said that u can get a bit more closer to 3" without the engineers certificate and so on .
going to have to be for a heavier load cause of tools and so on for work then for traveling also .

[sjwortho]

Just completed the back seat hack . .

now to figure out what to put in there .

maybe sneaky bourbons for an emergency


it was super simple and anyone can do it

[TOYZX]

Yeah cool. Just keep an eye on them cv angles when ya get around 3inchs. Great mod that seat one! Plenty of little tricks like that on here mate, power window mod is one of my favorites!

[sjwortho]

Yeah that one looks a little more challenging .

[sjwortho]

Yeah that one looks a little more challenging .

[sjwortho]

Hey guys im just thinking if there is anything else that should be done at the same time as the bullbar and winch . Thinking maybe the lift kit but it might be better after all the tray and back is done to make it nice and level any advice would be great

[TOYZX]

Get all your heavy mods done so ya know how much you weight the get ya springs to match. Body lift while the bar is off!

[sjwortho]

yeh wel the tray will be going on in a few weeks . . but the bar in the next week or so .

so the bar and whinch will go on . .


should i get the 2" lift at this point also



thanks man

[TOYZX]

Yeah you'll be fine, just make sure ya tell em ya intend to put a tray on.

[sjwortho]

Yeah i think thats the best way . Less down time with the ute

[sjwortho]

update

my lux is in the shop now and is getting a bullbar and a 2 inch lift

happy this is all moving faward .

and the tray and all other extras are underway

[sjwortho]

so today i got a call from the 4x4 shop and the front bullbar and winch is on . . .

they we good and also wired the for lights in even though there was not cables in there and put a nice switch bellow the cigarette tray

they where meant to also do a 2 " lift but we are going to wait till the steel tray and all the back is done so we can get it nice and even . . .




really happy and cant wait for the next mods

[lyndon1706]

Sent u some info on the audio situation mate. Coming along nicely there, u thought about bash plates? If u got all the other tough shit might as well look after the underneath too

[sjwortho]

yeh i think im going to definatly get that on the underside .

its got a long range tank in it so not sure about that over rocks and so on .

[TOYZX]

Looks like the goods mate! if it's got a long ranger tank, they are pretty strong and you'd have to be really unlucky to knock a hole in it. If ya gunna get serious I'd be getting rid of those dodgy side steps and get a good set of rock sliders to protect them sills.

[sjwortho]

yeh i have them comming very soon . .

ive ordered
sliders
brushbars .
roof top tray and the
steel tray with trundle
locklable cage
canvas canopy over the top

[sjwortho]

Also have a snorkel ready to fit .

just need to grab a hand of a made as im not to confident with this car thing