Chaps 2008 D4D SR5 build

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: Chaps 2008 D4D SR5 build

Postby Ubahalex on Sat, 12 Mar 2016 10:53 +0000

Really nice looking lux
Ubahalex
 
Posts: 21
Joined: Sat, 22 Aug 2015 6:13 +0000
Location: Yeronga, Queensland


 

Re: Chaps 2008 D4D SR5 build

Postby TOYZX on Sat, 12 Mar 2016 11:51 +0000

Nice one mate! keep up the good work.
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Chaps 2008 D4D SR5 build

Postby chappelle on Sat, 12 Mar 2016 1:55 +0000

rds_929 wrote:awsome thanks mate yeah that's where i got mine from pretty sure they're the same any chance you could get a few close up pics of how the recovery points are mounted ??


I looked back through my phone, i remember there was some difficulty now.
some pics below:

Image

You see the bull bar bracket partially covers one of the mounting holes, i either drilled it out or used an angle grinder and cut out a small section so the bolt could go through.
Image

You have to do up the top two bolts, then put the side bash plate in position and then the bottom bolt over the whole lot.
Image
chappelle
 
Posts: 19
Joined: Sat, 12 Oct 2013 4:38 +0000
Location: Perth, Western Australia

Re: Chaps 2008 D4D SR5 build

Postby rds_929 on Mon, 14 Mar 2016 3:56 +0000

legend thanks heaps mate really appreciate it
rds_929
 
Posts: 402
Joined: Mon, 01 Jun 2015 6:26 +0000
Location: melbourne , victoria

Re: Chaps 2008 D4D SR5 build

Postby Jackeylegs on Mon, 14 Mar 2016 4:53 +0000

Nice looking lux mate. Mammoth effort on the tray change over. I had to remove my Outback draws a few times and that was a big enough job. Good job!
Jackeylegs
 
Posts: 1
Joined: Thu, 04 Aug 2011 12:38 +0000

Re: Chaps 2008 D4D SR5 build

Postby will 4x4 on Tue, 28 Mar 2017 4:40 +0000

Nice build mate! Looking real neat, im about to install a ctek aswell, theres a temp senson which says it gets mounted to starter battery, have you just mounted yours to aux batt?
will 4x4
 
Posts: 70
Joined: Wed, 11 Feb 2015 2:05 +0000
Location: victoria

Re: Chaps 2008 D4D SR5 build

Postby chappelle on Tue, 28 Mar 2017 5:24 +0000

Yep, just mounted it with the aux battery and all works beautifully.
chappelle
 
Posts: 19
Joined: Sat, 12 Oct 2013 4:38 +0000
Location: Perth, Western Australia

Previous

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 45 guests