Oggy extract's a digit (finally)

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: Oggy extract's a digit (finally)

Postby TOYZX on Thu, 03 Sep 2015 9:35 +0000

Excellent idea mate! Top build too, keep it up.
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000


 

Re: Oggy extract's a digit (finally)

Postby Rocket55 on Thu, 03 Sep 2015 4:07 +0000

Looks good Oggy 8-)
Cheers Rod
__________________________________________________________________________________________
Bitumen ...... another waste of public funds
User avatar
Rocket55
Moderator
 
Posts: 7816
Joined: Wed, 16 Mar 2011 8:07 +0000
Location: Sutherland NSW

Re: Oggy extract's a digit (finally)

Postby dute on Thu, 03 Sep 2015 6:45 +0000

Not to shabby oggy well done. 8-)
FCCW

inside Dute's black hole

"Age and treachery will ALWAYS overcome youth and skill"
User avatar
dute
Moderator
 
Posts: 5102
Joined: Sun, 14 Sep 2008 10:17 +0000
Location: Melbourne Vic

Re: Oggy extract's a digit (finally)

Postby oggy on Thu, 03 Sep 2015 6:59 +0000

It's probably a bit of overkill being 8mm , but f$@#&% it better than finding out the hi lift has gotten out and walked 15km back ;) aiming to mount some maxx traxs under the bottom side of the tray too. I figure if i'm bogged that bad that i can't get to them then the bastards won't help anyway ;) Also thinking of getting one of these http://www.ebay.com.au/itm/111759642000 ... EBIDX%3AIT
Anyone tried one? figure if i crc the crap out of the jack then put the dinga on it , it might mean it still works when needed :roll:
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby oggy on Tue, 08 Sep 2015 10:33 +0000

edit
Last edited by oggy on Tue, 08 Sep 2015 12:31 +0000, edited 1 time in total.
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby oggy on Tue, 08 Sep 2015 12:28 +0000

oggy wrote:Slight mod to high lift bracket.Image
Made this for the handle end to take the vibration and bounce out of it. Just copied the other end and used that retaining bracket from the top and replaced it with a heavy flat washer.


ImageImage
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby oggy on Thu, 10 Sep 2015 12:46 +0000

Gotta love international SIG packagesImage

And take note. THIS is how you package thingsImage
That has now found its way to my back window[emoji41]

The point of all this is , thisImageImage

Started when I made my sliders by knocking up these bracketsImageImage

They sit hereImage

I set a 12 mm nutsurt in the hole in the chassisImage
I wanted them removable (just in case) and didn't want to weld them to the chassis. The hardest part was getting the angle right to clear the sway bar. Also you want them fairly vertical, so they need to go as close as possible to the strut tower. There's a fair bit of thread on the clevis bolt , so there's a lot of adjustment in them to suit your requirements. I set mine at about 65/70mm of droop. As I'm still in need of either extended ball joints or after market uca's. After some input from people that have tried the 25/35mm extended ball joints and also anyone that has the DMS coilovers, what uca's work and what still hit the coils?
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby lerroy on Sun, 03 Sep 2017 11:33 +0000

Hey Oggy

Digging up ya old post....

I have a MY07 with steel toyota bar wanting to get some fender flares but they all seem to stop at the fender seam and leave a space between where the infill/bumper plastic meets the bar

I see in your photos you have a plastic peice between, can you give me any info on this ?

cheers
User avatar
lerroy
 
Posts: 83
Joined: Wed, 09 Aug 2017 9:05 +0000
Location: WA Remote

Re: Oggy extract's a digit (finally)

Postby oggy on Sun, 03 Sep 2017 5:02 +0000

Check with your local dealer dude. There's 2 types available. One is pre facelift and one is post facelift like mine.
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby lerroy on Sun, 03 Sep 2017 6:55 +0000

Cheers thanks I'll give them a buzz.
User avatar
lerroy
 
Posts: 83
Joined: Wed, 09 Aug 2017 9:05 +0000
Location: WA Remote

Re: Oggy extract's a digit (finally)

Postby Critter350 on Sun, 03 Sep 2017 8:26 +0000

I think utemart make them to suit the genuine bullbar too


Cheers
Crit
Critter350
 
Posts: 521
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Oggy extract's a digit (finally)

Postby lerroy on Mon, 04 Sep 2017 2:37 +0000

Critter350 wrote:I think utemart make them to suit the genuine bullbar too


Cheers
Crit


they do but they look a bit strange I dunno...also out of stock for 12 weeks they said :(
User avatar
lerroy
 
Posts: 83
Joined: Wed, 09 Aug 2017 9:05 +0000
Location: WA Remote

Re: Oggy extract's a digit (finally)

Postby oggy on Tue, 05 Sep 2017 6:36 +0000

If i remember correctly :roll: I think you have to buy the entire headlight in fill(from Toyota) to get the little flarelets...I also bought the little flare bits for the bullbar too.
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Previous

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 33 guests