NewHilux.net

by **mattwhite** on Thu, 12 Dec 2013 10:14 +0000

So you're indicators on the guard, headlight and rear all work and they're fast? Have you got rear led?

by **wayn05** on Fri, 13 Dec 2013 7:23 +0000

Yeah I'd say either LED's or check the grounding on your negative. I had a sierra with a crazy blinker, just had to re-terminate the negative because the joint was a little loose and problem solved.

by **Diezel45** on Fri, 13 Dec 2013 8:15 +0000

nah, I haven't got LED at all. I had indicators in my old bull bar but now they are disconnected so my thinking is that they think they are blown because they are not connected at all?

by **Diezel45** on Fri, 13 Dec 2013 9:22 +0000

also, im trying to install my Depo Angel Eye Headlights and im struggling. haha

i cant get these to work. trying to put them in now and i have them working except for the circle lights around the headlights. have read through this thread and people say its easy but the instructions give no hint as to how to do it and all the pictures in the Monster Rides Depo Headlights thread about how to wire them have been taken down. could someone post some pics with how they are wired? i searched everywhere and couldn't find anything that could help me.

my main area of frustration, is the blue and black wire that come out of the back of the DEPO lights. it says to Rapid Clamp the black wire to "Black Wire (Bodywork) (Negative pole)" and the blue wire to the "Grey Wire (Bodywork) (Positive pole)"? where are these Black and Grey wires? or do I just run my own wires to a place on the cab. if i do that then wouldn't that make them both negatives? i am so confused. haha

by **jaybags** on Sat, 14 Dec 2013 12:55 +0000

End up working it out?

by **Diezel45** on Sun, 15 Dec 2013 8:27 +0000

sorry for the kate reply jaybags. yeah mate, got it all sorted now.

they look awesome!!

also removed my side steps and have measured and drawn up all of my plans for my rock sliders. going into town tomorrow to buy the steel so I can start making them while I have time off over chirstmas.

by **Stu.wrf450** on Sun, 15 Dec 2013 9:53 +0000

Where's the piccys??

by **Diezel45** on Sun, 15 Dec 2013 11:26 +0000

Normal high beams

With light bar

by **jaybags** on Mon, 16 Dec 2013 5:55 +0000

They look sweet as mate.
Looking forward to the sliders. Do you have a pipe bender?

by **Stu.wrf450** on Mon, 16 Dec 2013 6:11 +0000

Lights look good.lucky you bought some tickets.

by **Diezel45** on Mon, 16 Dec 2013 12:27 +0000

jaybags wrote:They look sweet as mate.
Looking forward to the sliders. Do you have a pipe bender?

cheers mate. nah I haven't, but my next door neighbour is a boiler maker so he is gonna bend the pipe for me at his work.

went and bought all the steel today and started putting them together. I have a mate who works for a steel supply company and I got all the steel for $75. he looked after me very well. over $300 worth of steel for $75, cant complain.

Stu.wrf450 wrote:Lights look good.lucky you bought some tickets.

yeah, very happy with them!

yeah, I was just happy about getting a stubby holder for 5 bucks. haha I thought that was a good deal! haha

by **jaybags** on Mon, 16 Dec 2013 2:03 +0000

Gees that's a good as deal! Always helps when you know someone hey

by **Diezel45** on Mon, 16 Dec 2013 2:58 +0000

yeah that's right. hes always good to get steel off. makes it heaps more worth while doing it yourself.

by **jaybags** on Mon, 16 Dec 2013 8:13 +0000

It would be. I wouldn't know where to start trying to make something like that though :lol:

by **Diezel45** on Tue, 17 Dec 2013 5:50 +0000

haha it all starts with this site. haha

by **Diezel45** on Tue, 24 Jun 2014 6:12 +0000

Righto, been a while since I have posted or even been around the site, had a few other things on.
Have done a little bit to the ute, after I snapped a cv 4x4ing through the forest because of my bald tyres I thought I had better get to work on the car and get her set up a bit better. Replaced my UHF areiel because my hold one had crapped itself. Also added a fair lead finally after A huge mess up with being sent the wrong one then being sent a broken one. Was a nightmare. Also, mounted my 240 xgts but haven't hooked them up yet. Hopefully doing that tomorrow.
Getting some patrol wheels cheap off a mate so will get some tyres put on and then see how that goes. Will get some photos for you tomorrow.

by **Diezel45** on Thu, 03 Jul 2014 9:14 +0000

Yeah so it turns out that this happened today! Haha

I can't believe how much bigger a tub makes the lux look! Looks like it has about a 4inch lift in the back!

So she looks a bit different at the moment. Hopefully starting my new tray in the next week or so!

by **white_hilux** on Thu, 03 Jul 2014 10:34 +0000

looking very nice. i also recently went from a tray to a tub and love the change

by **Diezel45** on Thu, 03 Jul 2014 10:45 +0000

Yeah, I do like the change, but I won't be keeping it. Haha so the tub will be up for sale in the next couple of months if anyone wants it? Haha

by **jaybags** on Thu, 03 Jul 2014 11:13 +0000

Why not keep it? Getting a custom tray made in the meantime?

That looks insanely high on the rear :shock:

NewHilux.net

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder

Re: The Allrounder - Tray gone. Now Tub!

Re: The Allrounder