DB's build

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: Sprint Booster

Postby Alby on Tue, 22 Oct 2013 5:20 +0000

outbackjoe wrote:You need to do the test with and without under the same conditions. Several times, alternating with and without to eliminate any trends and the tester can't know whether it's with or without. The answer is already known, it won't make any difference apart from the tiny fraction of a second it takes to push the pedal further. It's just about whether you like the pedal response or not. If you like it then it's good.



Joe I assume by your comments that you have never tried a sprint booster. I can assure you that you won't need to tell the tester if the sprint booster is on or not as it is in your face obvious by the difference in performance. After you have driven with one on, turning it off is like you have gone into limp mode.
It is a bit like saying rather than buying a faster computer I will tap the keyboard faster to make up the difference
On the internet you can be anything you want. It is strange that so many people choose to be stupid!
User avatar
Alby
 
Posts: 6673
Joined: Tue, 03 Jul 2007 1:00 +0000
Location: Sydney, NSW


 

Re: Sprint Booster

Postby Swinny on Tue, 22 Oct 2013 5:47 +0000

Alby wrote:
outbackjoe wrote:You need to do the test with and without under the same conditions. Several times, alternating with and without to eliminate any trends and the tester can't know whether it's with or without. The answer is already known, it won't make any difference apart from the tiny fraction of a second it takes to push the pedal further. It's just about whether you like the pedal response or not. If you like it then it's good.



Joe I assume by your comments that you have never tried a sprint booster. I can assure you that you won't need to tell the tester if the sprint booster is on or not as it is in your face obvious by the difference in performance. After you have driven with one on, turning it off is like you have gone into limp mode.
It is a bit like saying rather than buying a faster computer I will tap the keyboard faster to make up the difference

X2 for that
User avatar
Swinny
Platinum Subscriber
 
Posts: 1065
Joined: Fri, 24 Dec 2010 8:10 +0000
Location: GERALDTON W.A.

Road Conditions

Postby DeadlyBeast on Thu, 24 Oct 2013 8:32 +0000

Went for an early drive this morning to see the local shire has finally put up a useful road sign :lol:

20131024_061527 (Custom).jpg


Gear update!: Delay with the dispatch of sliders, rear bar and engine guard. Bud says the courier hasnt picked it up yet...
You do not have the required permissions to view the files attached to this post.
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Buds Gear Ordered

Postby SRLUXX on Sun, 27 Oct 2013 6:19 +0000

ahhaa now that's a classic bud saying that is.
User avatar
SRLUXX
 
Posts: 300
Joined: Sun, 28 Oct 2012 8:06 +0000

Re: Buds Gear Ordered

Postby Richard on Tue, 29 Oct 2013 5:54 +0000

Steve, a couple of questions if I may, where did you score the purple hose for your oil catcher and what size is it?

Thanks
Richard
User avatar
Richard
 
Posts: 904
Joined: Mon, 30 Jul 2007 1:00 +0000
Location: Sunshine Coast Qld

Re: Buds Gear Ordered

Postby DeadlyBeast on Tue, 29 Oct 2013 6:55 +0000

Hi Richard.
I got the Universal kit from Western Filters:http://www.westernfilters.net.au/index.php?cPath=138
The kit came with 5/8" hose which goes to the crank case breather.
I ordered a 1m length of 1" hose to go to the turbo: http://www.westernfilters.net.au/index.php?cPath=27
If I were to do it again I would go with black. The coloured silicon looks good when new but discolours over time.
The thread below might be of use if you haven't already seen before
http://www.newhilux.net/phpbb/viewtopic.php?f=8&t=11902&start=140
Cheers
Post edit: Not sure if still there but when i ordered this chap was very helpful:
Jon Hope
0415 461914
e: jon@westernfilters.com.au
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Buds Gear Ordered

Postby Richard on Tue, 29 Oct 2013 7:08 +0000

Thanks mate!

Richard
User avatar
Richard
 
Posts: 904
Joined: Mon, 30 Jul 2007 1:00 +0000
Location: Sunshine Coast Qld

Re: Buds Gear Ordered

Postby MrJETWAVE on Wed, 30 Oct 2013 9:15 +0000

Hey mate just wondering how you cut your dump pipe??
MrJETWAVE
 
Posts: 32
Joined: Tue, 21 Aug 2012 9:46 +0000

Re: Buds Gear Ordered

Postby DeadlyBeast on Wed, 30 Oct 2013 10:17 +0000

What have you tried so far ? I wouldn't recommend cutting the dump pipe unless all other measures are exhausted... no pun intended. If you dont live in a remote town buy a single hex or 3/8th drive 12mm socket with 3/8th extension or metrench set and use penetrant for a few days. I didn't have time for the right tools to arrive so cut with a hacksaw blade with a single ended handle. The pipe is thick and takes forever to cut but managed to convince a 1/2 drive impact socket to fit after cutting off. You could try a turbo socket...
Good luck.
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Buds Gear Ordered

Postby DeadlyBeast on Wed, 30 Oct 2013 10:17 +0000

Double post
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Buds Gear Ordered

Postby MrJETWAVE on Thu, 31 Oct 2013 8:27 +0000

Woo hoooooo... Finally.. It came off, now to the next point.... For those who rounded or completely f'd up th nuts. Did you just use a normal M8 nut? Would you use a spring washer as well??
MrJETWAVE
 
Posts: 32
Joined: Tue, 21 Aug 2012 9:46 +0000

Re: Buds Gear Ordered

Postby DeadlyBeast on Thu, 31 Oct 2013 9:23 +0000

Good news JW - what tool did you use?
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Buds Gear Ordered

Postby MrJETWAVE on Thu, 31 Oct 2013 12:34 +0000

Yeah dunno on the name of the tool could be one of those turbo sockets they speak of. Basically it's a 12mm socket that grips the nut. Would have been screwed with out it.
Cheers for the help
MrJETWAVE
 
Posts: 32
Joined: Tue, 21 Aug 2012 9:46 +0000

Re: Buds Gear Ordered

Postby DeadlyBeast on Wed, 20 Nov 2013 6:18 +0000

MrJETWAVE wrote:Yeah dunno on the name of the tool could be one of those turbo sockets they speak of. Basically it's a 12mm socket that grips the nut. Would have been screwed with out it.
Cheers for the help
No worries mate - sounds like a turbo socket did the job for ya.
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Buds Gear Ordered

Postby DeadlyBeast on Wed, 20 Nov 2013 6:26 +0000

Update from from Bud:
Delayed dispatch of consignment - but its been given #1 on priority to get right and out the door.
Cant ask for more than that can you
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Weather Shields

Postby DeadlyBeast on Fri, 29 Nov 2013 8:00 +0000

The wet season is here again - along with it 40+ degree heat and hot steamy cabs.
Why did I take so long?
One reason I didnt install weather shields until now is that I didnt like the look of genuine shields and aftermarket ones looked as if they didnt fit well. I've seen some other shields that fit very poorly - gaps at top of window recess etc.
Saw these:
http://www.ebay.com.au/itm/4x4-Toyota-Hilux-Weathershield-Protector-2005-2013-/221231631631?pt=AU_Car_Parts_Accessories&hash=item33826ecd0f
Looked like a good fit but didnt like the 'Vigo' printing on them. Asked the seller if the print could be removed - they were very honest and said "no, not even not even if you scratched it off". Well I thought I could get it off so bought a set.
So purchased the finest wet and dry paper available at the time in town (1400 was the finest I could get)
Image
Sanded as lightly as possible to remove all print
Image
Image
Polished out with Maguiars PlastX. Took ages to remove the abrasions from the 1400 grit. I would have preferred 2000 or more.
Image
For the other side I just used the PlastX and a dremmel buffing wheel - slow speed. The polish flys everywhere and if you run the wheel dry it will 'burn' a hole int the plastic. With lots of polish and a light touch this method was the quickest. After polish can only faintly see the outline of where the printing was (4th pic) - looks like it was put on with a thermal printer.

These do create a bit more pillar blind spot being tinted but happy with the end result and the fit.
Image
Image
Image
Last edited by DeadlyBeast on Sat, 30 Nov 2013 9:14 +0000, edited 1 time in total.
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Lost Photobucket links scrambled

Postby DeadlyBeast on Sat, 30 Nov 2013 4:05 +0000

Thought about posting this in the 'what gotten you upset' thread but it pales to what some guys are going thru.
Anyway... Dont do this:
Thought I would increase the security settings and hit scramble links for future posts - didnt read that it also scrambles previous posts :oops:
So loads of pics are down and need to be reassigned correct links to photo bucket.
Just finished redoing the snorkel install guide - took forever :roll:

On the bright side of things Bud says he is honestly looking at sending the sliders/rear bar and bash plate on the 10/12 :)
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Buds Gear Ordered

Postby Richard on Sun, 01 Dec 2013 11:27 +0000

Hate to say this mate but he told me the same thing about my rear bar, bash plates and sliders, said he'd have them in Darwin by Thursday 5/12 :roll:

Richard
User avatar
Richard
 
Posts: 904
Joined: Mon, 30 Jul 2007 1:00 +0000
Location: Sunshine Coast Qld

Re: Buds Gear Ordered

Postby Jack S on Sun, 01 Dec 2013 12:41 +0000

What's this, buddy saying he will have some thing delivered by a certain date, :lol: don't make me laugh...
User avatar
Jack S
 
Posts: 3424
Joined: Thu, 17 Sep 2009 4:29 +0000
Location: Bathurst, NSW

Re: Buds Gear Ordered

Postby DeadlyBeast on Sun, 01 Dec 2013 4:48 +0000

Good things take time.
I believe in the product - its quality gear made in Australia.
Have heard of a large supply company taking 9 months to fill an order - so I decided not to use them for my gear.
Preferring not to spend my money with large international companies who may be inclined to be 'too big to care' and less inclined to provide good customer support, I chose to support a small growing business from the good reputation and feedback provided by this forum.
I trust that the gear will come thru as promised

EDIT:
I was so wrong to support this business based on the above assumptions.
Ended up taking 21 months to receive all the gear ordered.
If I was told this from the beginning I would have gone else where. Seriously - who would wait nearly 2 years?
Broken promises after false consignment numbers, stalling tactics, non-reply to emails with plain blue faced lies on top.
Just sad.

Have heard really good customer feedback from Phat Bars in my town. No BS, great product and superb customer service.
Last edited by DeadlyBeast on Fri, 20 Nov 2015 7:34 +0000, edited 1 time in total.
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

PreviousNext

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 24 guests