DB's build

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

DB's Cage Canopy Build

Postby Critter350 on Mon, 27 May 2019 9:21 +0000

Must have been a nasty injury to set you back ~ 8 months, hope you’ve shaken it off now. Nice clean cuts there, makes the weld up much easier.
The rear looks slightly higher, might be my eyes...


Sent from my iPhone using Tapatalk
Critter350
 
Posts: 521
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA


 

Re: DB's Cage Canopy Build

Postby DeadlyBeast on Mon, 27 May 2019 6:50 +0000

Yep, a doozy
Image


Image
Nothing wrong with your eyes there mate. Both the front and rear were about an inch taller while sorting out the correct angles and final height. Cutting it down so that both legs of the support hoops were the same length was a bit tricky. I didnt have a straight edge long enough to strike across the the ends so had to use an old and rusty monster sized builders T square, measure off a spirit level for correct height at one end then do the same on the other. Simples :lol:

Image
Another high tech system in use

Image
A drill press vice would have been handy
Image
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: DB's Cage Canopy Build

Postby TOYZX on Tue, 28 May 2019 5:05 +0000

Far out, I think I should keep my mouth shut about my sore neck then lol! Glad to see ya ok DB!

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: DB's Cage Canopy Build

Postby hiluxxury on Tue, 28 May 2019 6:10 +0000

DeadlyBeast wrote:Yep, a doozy
Image


How did you do that?
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: DB's Cage Canopy Build

Postby DeadlyBeast on Tue, 28 May 2019 11:45 +0000

Years of abuse from being young and unaware of own mortality, a couple concusions and sport related impact accidents catching up
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: DB's Cage Canopy Build

Postby hiluxxury on Tue, 28 May 2019 1:12 +0000

Ah yes, I know too well about that.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: DB's Cage Canopy Build

Postby DeadlyBeast on Sat, 01 Jun 2019 10:10 +0000

Not much fun at the time but pretty good now mate

Slightly annoying problem with the cheap drill press... The last notch ended up looking messy AF :evil:
The chatter from the 50mm bit had caused the press to vibrate the nuts off the stand base.
Image

Degreased, loctite and well tightened
Image

A handy work bench - using the offcut hoop leg to flapper disc the rail notch
Image

Tacked up
Image
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: DB's Cage Canopy Build

Postby Ozwaz on Sat, 01 Jun 2019 2:05 +0000

Looks great mate but why to roof level? What is your grand plan?
Ozwaz
 
Posts: 115
Joined: Mon, 27 Jun 2016 8:17 +0000
Location: Rossville FNQ

Re: DB's Cage Canopy Build

Postby Critter350 on Sun, 02 Jun 2019 8:47 +0000

Sketchup image at post #375


Sent from my iPhone using Tapatalk
Critter350
 
Posts: 521
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: DB's Cage Canopy Build

Postby DeadlyBeast on Sun, 02 Jun 2019 12:28 +0000

Thanks Critter
Plan is to turn it into a dedicated tourer. Canopy lines will follow those of the cab.
Needs to be same height as cab for air flow to enter canopy vent - to be detailed later.
Drawers and compressor to go in shortly.

Went to engineering shop to get top curve sheet and rear quarter panel pressed.
Wasn't satisfied with the penetration and intermittent porosity of the welds I was achieving so got the structural joints TIG'd while there too.

Progress shots

Image

Image

Image

Image

Image
26kg without doors
Estimate about 4kg per door, 4-5kg of marine canvas
Looking at around 42kg give or take... not as light as I thought it would be but its solid
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: DB's Cage Canopy Build

Postby TOYZX on Sun, 02 Jun 2019 1:20 +0000

Very nice job mate! 40+ kgs is still bloody good, imagine how heavy it would've been in steel!

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: DB's Cage Canopy Build

Postby DeadlyBeast on Thu, 06 Jun 2019 8:39 +0000

Thanks Luke. True that - about 120kg in steel :shock:

Image
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: DB's Cage Canopy Build

Postby NZMarkb on Fri, 07 Jun 2019 2:17 +0000

That looks great DB
If your not prepared to stand behind our Troops
Then try standing in front of them
User avatar
NZMarkb
Platinum Subscriber
 
Posts: 702
Joined: Thu, 18 Jul 2013 3:48 +0000
Location: Auckland NZ

Re: DB's Cage Canopy Build

Postby DeadlyBeast on Fri, 07 Jun 2019 8:45 +0000

Cheers Mark. Fairly happy with how it turned out.
A little more to do down the track

Image

Image

No ropes or bungee to hold the cover to the front of the tub. Flipped the sail track from the old SR5 style tenneau cover around, replaced rivets with nutserts and 5mm button heads so the trimmer could easily reposition and fit. Removed this in just a few minutes doing a dust and water ingress check.
Image

Solar input easily accessible
Image

Canopy vent works very well. Just the one for the moment
Image
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: DB's Cage Canopy Build

Postby TOYZX on Sat, 08 Jun 2019 7:13 +0000

Came up mint mate, great job!

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: DB's Cage Canopy Build

Postby hiluxxury on Sat, 08 Jun 2019 10:43 +0000

That looks really good
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: DB's Cage Canopy Build

Postby Caleebra on Mon, 10 Jun 2019 5:42 +0000

Wow, amazingly done DB!
This is something i'd want to do similar to!
Especially with the canvas cover! really dig that look!

Again, kudos to you mate, what a neat job! I'm blown away!
- Arne from Norway here, glad to chat with you -

Instagram: @arnlux_adv
Facebook: - Arn's Lux Adventure -
:D
User avatar
Caleebra
 
Posts: 266
Joined: Thu, 23 Feb 2012 7:32 +0000
Location: Norway

Re: DB's Cage Canopy Build

Postby DeadlyBeast on Thu, 13 Jun 2019 5:33 +0000

Thanks guys. I had plenty of time to think about it :lol:

The dust test. Having run a tonneau cover for near on 10 years I have tried dust seal kits, rubber adhesive moldings, blankets and towels around the tail gate gap to stop dust from coming in. What worked the best was a off cut of 2.5" PC pipe and a 90° bend to form a cheap snorkel. That only cost a few dollars but worked well... as long as it had unobstructed air flow and the gear underneath didn't block it.
It looked a bit stupid but only used it when going Bush.
Image

So I found a good 40km bull dust track to test out the ARB vent
Image
The dust is ultra fine. Was talking to a bloke who did outback vehicle testing for Toyota - apparently Zthe engineers at Toyota say the Australian dust particulate size of the red dust is the smallest anywhere in the world. Has implications on air filter micron.
Anyway, this was a semi used piece of wet wipe after 40km track

Image yep, still had a towel over the rear gear... old habits. Without any positive air flow or dust seal this entire area would be completely covered in dust even thicker than the outside tailgate panel

The system relies on clean air coming into the vent. Passing the occasional on coming vehicle quickly allows very little dust ingress but following a convoy or road train for any decent distance will fill the canopy with dust.
Have seen air filters and fans added to canopy vents but it's more sh#t to do and more to go wrong. Will run this for a season and go from there
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: DB's Cage Canopy Build

Postby hiluxxury on Thu, 13 Jun 2019 8:45 +0000

The snorkel looks like a neat solution.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: DB's Cage Canopy Build

Postby William_Foster on Thu, 13 Jun 2019 5:25 +0000

Much better than my last trip DB, some how dust managed to make its way into my closed tool boxes.

Image
2013 Toyota Hilux SR5
4x4 Manual Diesel
User avatar
William_Foster
 
Posts: 248
Joined: Sat, 11 Jan 2014 3:58 +0000
Location: Northern Territory

PreviousNext

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 22 guests