Page 10 of 10

Re: Gull wing canopy WIP Version 1.2

PostPosted: Mon, 09 Dec 2013 5:09 +0000
by 07luxyTD
Looks much better mate, your gonna have to slow down or by the end of the 6 weeks yours gonna be out polishing the canopy every morning :lol:

Re: Gull wing canopy WIP Version 1.2

PostPosted: Fri, 13 Dec 2013 4:40 +0000
by Skog07
Done some more tidy up to the wiring.
Roughed in and finished the solar panel wiring over the last few days. Its been fun trying to balance on step ladders whilst using crutches. :lol: :lol:
Used some alloy jiffy boxes from Jaycar and some gland nuts to make sure there is a waterproof seal from the outside roof to the internal roof of the canopy.
Image
Image
Image
Internal Jiffy box with termination from the solar panel to internal wiring which runs along one of the strengthening braces along roof of canopy.Bit of room here to add some more circuits in. Thinking of running an Anderson plug with the provision to plug in another solar panel.
Image
Image
Had a few bits an pieces left over so I decided to put an ammeter with an isolator for the solar panel to measure input current.
Image
Image
Had to make a special spanner to get to the back of a few of the nuts on the fasteners in the roof.
Image

Re: Gull wing canopy WIP Version 1.2

PostPosted: Sat, 14 Dec 2013 4:55 +0000
by McSumWay
Sit down!!

Re: Gull wing canopy WIP Version 1.2

PostPosted: Sun, 15 Dec 2013 5:19 +0000
by 07luxyTD
X2 or you will end up like wazza aswell :lol: :lol:

Re: Gull wing canopy WIP Version 1.2

PostPosted: Mon, 16 Dec 2013 11:33 +0000
by Skog07
Well...
I can't sit still sorry.....
Needed to fab up a bracket to hold the 175A Anderson plug.
ImageImage
Image
ImageImage
Image

Image
Image
Cheers Skog

Re: Gull wing canopy WIP Version 1.2

PostPosted: Tue, 17 Dec 2013 4:33 +0000
by kyle300exc
I call unfair, not only do you have a shed equipped with what the average man would trade their left nut for but now you have all the time in the world to work on your build. Unfair advantage I say.

Re: Gull wing canopy WIP Version 1.2

PostPosted: Tue, 17 Dec 2013 6:32 +0000
by Alby
:lol: :lol: :lol:

all the gear and no idea!

Re: Gull wing canopy WIP Version 1.2

PostPosted: Tue, 17 Dec 2013 6:39 +0000
by 07luxyTD
I hope thats not straino and no cutting compound :o I used to love when i had full access to a machine shop. Now i only have access to a lathe that runs 4 thou off centre and runs like a chaff cutter :roll: So whats on the list after the anderson plug?

Re: Gull wing canopy WIP Version 1.2

PostPosted: Tue, 17 Dec 2013 6:45 +0000
by mattwhite
Top work man. Love it. There's not one pic of the whole setup getting dirty but. Or is that in a trip thread? :lol:

Re: Gull wing canopy WIP Version 1.2

PostPosted: Tue, 17 Dec 2013 11:26 +0000
by Skog07
Image
Image
Image
Image
And this bracket will be chopped out.
Image
More updates soon.

Re: Gull wing canopy WIP Version 1.2

PostPosted: Thu, 01 Jun 2017 9:59 +0000
by Skog07
May 30, 2017 Rolls past and the old lux turned 10 yesterday. With 197000ks on the clock she goes in for a pink slip tomorrow.

Re: Gull wing canopy WIP Version 1.2

PostPosted: Tue, 06 Jun 2017 5:10 +0000
by DeadlyBeast
Skog07 wrote:More updates soon.

4 years later :lol:

Happy 10th to the rig 8-)
Howd the pink slip go?