Gave the old girl some love this weekend with a good service. Also knocked up support bracket for my dump pipe cos I noticed it had worked itself loose the other week. Got the work lights on the tray mounted too which will come in handy.
Cheers mate. I'm running a 2inch OME suspension and 2inch body lift from VMN. Rims r 16 × 8 sunnies in zero offset. Next job is to modify the body mount cos I'm getting some rubbing when wheeling. Then will be re-gearing the diffs when I get the coin.
Cheers mate. I got a 3" suspension lift in now but am wanting a 2" body lift. What'd that set ya back if ya don't mind me asking? Also, what wheel offset would be better for factory UCAs with 305/70r16s
Dunno exactly what offset you'd need for 305s but I reckon you'd want at least +10 or less. The body lift kit was just shy of 700 delivered from memory. Google the Vehicle Modification Network (vmn) their kit is by far the best available.
Cheers HRG92! The intercooler set up I made myself, got the idea on here to make the frame and took it a set further by adding the fan. Ya need to had done a body lift to have the room to pull it off tho.
Finally pulled my finger out and finished the breather for my fuel tanks today. First was to knock up a t junction. Then cut the filler and slip it in. Not time to drink away this man flu!
Cheers. Nah just the second battery, I'll only be running an isolator up front as ive had the alternator done up so no need for a charger. Plus ill run large wire all the way so i can use it as an auxiliary starter.
Made the battery tray out of leftover plate from when i built my ute tray. Not sure about the agm, would need the measurements but it has an n70 in it now.
Cheers man! Still have a few little things to finish off but I'm happy with it. Thinking about making a rack system for it for some more touring storage and a custom low lying roof rack.